User's Manual

X
Ⅲ
Installation
ⅰIf you can’t fully insert the square rod into the front handle:
please use a screwdriver to toggle the installed hole of the front handle.
(if you need to cut short the square rod according your door thickness, please cut off it from the big side).
ⅱ if your door is Left Opening Door:
1. Please install the screw of the front handle to left hole.( in initial state, the lock is for left opening door )
2. Before installation, please insert the square rod into the front handle, and rotate the square rod along the direction
pointed by the arrow until it cannot be moved. please keep the rod in the final position(it can be moved) when installing.