User's Manual

XI
ⅲ
if your door is Right Opening Door:
1. Please install the screw of the front handle to right hole.( in initial state, the lock is for left opening door )
2. Before installation, please insert the square rod into the front handle, and rotate the square rod against the direction
pointed by the arrow (counter clockwise) until it cannot be moved. please keep the rod in the final position(it can be
moved) when installing.
ⅳ
The lock is suited for 35-60mm door thickness. But the standard square rod is just suited for the door thickness of
40-45mm.
1. If your door thickness is less than 40mm, (is 35-40mm), you have to cut short the square rod according to your door
thickness. (please cut short from the big side)
2. If your door thickness is more than 45mm( is 45mm-60mm), you have to insert the spring into the rear handle.
ⅴ
You can scan the following QR Code to refer the video about how to adjust the lock , how to install and operate.