User's Manual

III
please input administrator information (the first three added fingerprints or passwords are the administrators.)
after verify, the lock will broadcast: “ press “1” for fingerprint entering, press “2” for password setting, press “3” for
restore factory setting, press “4” for language switch, press “5” for normally open mode, press “6” to turn on Bluetooth
and press “*” to exit. “
Then press “4”, then the lock will broadcast: “
中文
/English “.
ⅴ
Normal Open Mode
Waken up the key board, long click “#” to enter system, the lock will broadcast: “ please verify the administrator “, then
please input administrator information (the first three added fingerprints or passwords are the administrators.)
after verify, the lock will broadcast: “ press “1” for fingerprint entering, press “2” for password setting, press “3” for
restore factory setting, press “4” for language switch, press “5” for normally open mode, press “6” to turn on Bluetooth
and press “*” to exit. “
Then press “5”, then the lock will broadcast: “normally open mode“.
If you want to close normal open mode, you can enter system again and press “5” or use a valid user information to open
the lock, then the lock will broadcast: “cancel normally open mode”.
Ⅱ
Connect the lock with App
ⅰ App Installation
1. Download and install the "Smart Life" APP from the application market or scan the QR code.
2. After installation, follow the prompts to register and log in.
ⅱ
Connect the lock with smart life app:
1. Open the Bluetooth and Location of your smartphone.
2. Waken up the key board and long click “#”on the lock to enter system, verify administrator and press “ 6” to enter
networking mode.
3. Open smart life app, the device will automatically pop up, the device name is "WF-016", please add the device and
modify device name.