User' s M anual C27G-5S-BTW MADE IN HUAPTEC 1 / 13
Content WHAT IS INCLUDED ................................................................................... 3 1 HOW IT WORKS .................................................................................. 3 2 TOOL REQUIRED ................................................................................. 3 2.1 Overview .................................................................................... 3 2.2 Plan the layout of your system ................................................... 5 2.
WHAT IS INCLUDED 1. 2. 3. 4. HiBoost vehicle booster C27G‐5S‐BTW Outdoor Antenna & Cable Indoor Antenna &Cable DC/DC Power Adapter 1 HOW IT WORKS The cellular booster provides reliable two‐way cellular coverage by improving signal strength in vehicles, where cellular reception is weak or unreliable. The system amplifies the signal from the nearest cellular tower and retransmits at a higher power level within a local area.
/ 13
2.2 Plan the layout of your system Before you get started you will need to plan the layout of your system. This involves checking signal strength for signals coming from the cellular tower, as well as antenna, booster and cable placement. 2.3 Check for Signal Strength Select a location on the roof of the vehicle to install the signal antenna, by monitoring your cellular phone’s signal strength (signal bars) to find the strongest signal from your carrier’s cellular tower.
2.6 Install the Server (Indoor) antenna Connect one end of the coaxial cable to the antenna and the other end to the cellular booster where it is marked “Indoor”. Select the installation location of your supplied server (indoor) antenna based on the following: Magnetic antenna Place in the center of the area where the signal needs to be amplified. For Magnetic antenna, it comes with cable default which is no need to buy extra cable.
Connector Indoor Outdoor DC 12‐5V USB Description SMA‐female connector, for connection to indoor antenna SMA‐female connector, for connection to outdoor antenna Power wire port For debug connector 3.2 LED Status LED Alarm Bluetooth WIFI Status blue Red off blue blue Definition It is working properly Alarm No power input Normal Normal 4 UNDERSTAND THE ANTENNA 4.1 Donor (Outdoor) antenna The Omni Antenna The omni antenna is a very precise omni‐directional antenna with a 360 degree reach.
4.3 Authorized Kitting Options The following accessories are authorized by the FCC to be used with the Hiboost vehicle Signal Booster. Outdoor antenna & cable kit options Outdoor Outdoor Antenna Antenna Gain Lower 700MHz Upper 700MHz Cellular PCS AWS‐1 Omni antenna 4 4 4 5 6 magnetic antenna （include cable） 1 1 2 3 4 Outdoor Cable Outdoor Outdoor Cable HiBoost200 (50 feet) Cable Loss Lower 700MHz Upper 700MHz Cellular PCS AWS‐1 2.2 2.3 2.3 4.0 4.
4. Change the indoor antenna type to an antenna with a more directional antenna pattern. Orient the indoor antenna and outdoor antenna so they point in opposite directions. 5. Reduce the booster’s downlink gain via setting the gain parameter in app. Keep the uplink gain value and downlink gain value the same then restart the booster. Note: Uplink gain must be equal to or not less than 5dB below the downlink gain, to avoid interference with the local carrier's cell site network.
pointing to each other and by having enough distance or barrier shielding in between them. The signals travel like rays of sunlight, a directional antenna will send the signal in the direction that it is pointing. An omni directional antenna will send the signal in every direction around it. So depending on your equipment it’s important to be sure that your Indoor antenna is not sending the signal back into the outdoor antenna. THINGS TO CHECK WHEN EXPERIENCING WEAK CELLULAR SIGNAL 1. 2. 3. 4.
7 Warning and Statement Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ISEDC Statement: This device contains licence‐exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence‐exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference; 2. This device must accept any interference, including interference that may cause undesired operation of the device.
SHENZHEN HUAPTEC CO., LTD 5th FL, E BLDG, Sogood Science Park, Hangkong Road, Xixiang, Bao'an, Shenzhen, China 518102 Phone/Fax: 086‐0755‐29921615 Website: www.huaptec.com Huaptec US Inc. 6210 N Belt Line Rd., Ste. 110, Irving, TX 75063 Phone/Fax: (972) 870‐5666 E‐mail: info@huaptecus.com Website: www.huaptecus.
