User's Manual

capturingadequatesignalforthebooster.
2. Checkallconnectionsonthecable,antennas,andbooster.
3. Checkcableforbendsandorcuts.
4. AllLEDlightsontheboostershouldbegreen.
5. Outdoorantennaandtheindoorantennashaveadequateseparation
andarenotcausingfeedback.
8 FREQUENTLYASKEDQUESTIONS
WHY ARE THE LED LIGHTS TURNING ORANGE, RED OR 
SHUTTINGOFF?

There are certain cases where your system could be experiencing
oscillation. This can be attributed to either the quality of your input
signal or having your outdoor antenna and indoor antenna too close
together. Please review the following guidelines
to help resolve this
issue:
1. Adjust the direction of the outdoor antenna. If the system is
receiving a very high input signal, you can point your outdoor
antennaawa yfromthecellular tower toreduce the strengthof the
input signal and therefore, reduce the oscillation. Alternatively if
your system
 is receiving a very poor quality signal (weak and
unusable signal), you can point your outdoorantenna moredirectly