19
HOW IT WORKS Huaptec digital repeater is actually a mobile communication signal relay amplification device with the same frequency. It has two separate internal amplification links, uplink (or forward link) and down link (or reverse link). Downlink receives signals from BTS (Adopt donor antenna and BTS by air coupling), send the signals to coverage area after amplification. At the same time, the uplink receives the signals from MS through server antenna.
H"1oosT Digital repeater is also equipped with optional industry level remote control and monitoring function, to realize the functions such as setting the repeater, power switch, store all the logs for alarms and operations, repair handing, to get the operating status for all the repeaters on time, it can greatly save times for operator to maintain, and timely to maintain the stable operation of equipment.
Equipment Ports description I Connector BS/ BTS Description N-female connector, for connection to donor antenna MS N-female connector, for connection to service antenna Debug Local debug by MDS Software, for connection to USB cable. Antenna For connection to modem antenna. Local Local control andmonitoring byOMT Software,for connection to USB cable. SIM Card SIM Card slot.
•Check whether it is necessary to add one or more antennas to enhance the coverage of special areas. FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled enviroment. This equipment should be installed and operated with minimum distance 40cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
H"1oosT electric shock. & Do not open the booster, touch the module of booster, or open the cover of module to touch the electronic component. The components will be damaged due to electrostatic. 必 Please keep away from heating-equipment, because the booster will dissipate heat during working. And do not cover booster with anything that influences heat-dissipation. WARNING.This is NOT a CONSUMER device.It is designed fo 「 installation by FCC LICENSEES and QUALIFIED INSTALLERS.
WARNING: This is NOT a CONSUMER device. It is designed for installation by an installer approved by an ISED licensee. You MUST have an ISED LICENCE or the express consent of an ISED licensee to operate this device. Link to CPC-2-1-05 http://www.ic.gc.ca/eic/site/smt-gst.nsf/e ng/sf08942.
