User's Manual

User Manual

- 19 -

 For F15C-CP:

Switches 1-4 represent Downlink and 4.8 represent Uplink. When it is necessary to adjust the gain by

DIP switch, firstly please adjust Downlink gain according to input signals, secondly please adjust

Uplink gain according to Downlink gain.

The DIP Switches have default ‘OFF’ status; please push relevant switches to “ON” position if certain

attenuation value needs to be achieved.

z DIP switch attenuation setting:

Att 1 2 3 4 Att. 1 2 3 4 Att. 1 2 3 4 5

0 dB off off off off 6 dB off ON ON off 12dB off off ON ON 12dB

1 dB ON off off off 7 dB ON ON ON off 13dB ON off ON ON 13dB

2 dB off ON off off 8 dB off off off ON 14dB off ON ON ON 14dB

3 dB ON ON off off 9 dB ON off off ON 15dB ON ON ON ON 15dB

4 dB off off ON off 10dB off ON off ON

5 dB ON off ON off 11dB ON ON off ON

 For F15B-CP-M:

Turn ON the dip switches to reduce gain as follows:

Put ON a pair of switches for a total of 15dB reduction in gain.

(DL1 & UL1 – Alarm Low) – For 800MHz or 900 MHz Band

(DL2 & UL2 – Alarm High) – For 1700, 1800, 1900 & 2100 MHz Band

10dB 5dB