User's Manual

5
 Embedded CPU, self-adaptive intelligent system to make booster system very
easy to install and better performance is guaranteed under complex and
constantly changing RF environment.
 ISO: Intelligent isolation processing to avoid self-oscillation, quite wide
adjusting range to stabilize the signal strength/quality for clearer voice/ higher
data speed and avoid interference to mobile network
 ALC: Intelligent ALC, quite wide adjusting range to improve the signal quality
for clearer voice and higher data speed
 LCD Display: to display ISO status, ALC status, actual gain and downlink
output power that make booster installation and troubleshooting much easier
 MGC: control button to adjust the gain for both uplink and downlink
independently, 31dB range
 Excellent RF performance, larger coverage area, clearer voice and higher
speed data services.
 Elegant design, small size, very low power consumption to save cost during
operation and low heat dissipation.
The following image shows the key components of the booster. There are 3 parts:
first part is LCD indicator, which will show the booster status. Second part is control
button. Third part is connectors to the outdoor antenna and indoor antenna. The
following tables and graphs show the details.
1. LCD 2. Control Button 3. Outdoor antenna port
4. Debug Port 5. Indoor antenna port 6. Power connector