User's Manual

NATURAL ENERGY LAMP
User Manual
English
Package including
Thank you for purchasing this product. To ensure proper use and
trouble-free operation, please read the user manual before use.
LED Light Diffuser Increase Brightness
Decrease Brightness
AC/DC Adapter
RF Remote Control
Support Stand
Power / Light Temperature
DC Port
Timer
- 1 -
How to Use
1. Install Support (See Picture 1)
2. Set up Lighting Temperature
3. Set up Lighting Brightness
4. Timer
Press the power button to switch the color temperature from daylight,
natural light, and warm light.
Press the +/ - button to adjust the brightness. Short press to adjust for
5 levels of brightness. Long press to customize your desired brightness
and then release the button.
Press the Timer button to set a 10/ 20/ 30/ 60 minutes timer. The light will
turn off itself with the end of the setting time. Short press to turn off the
timing function.
- 2 -
Specification
6. Remote Control
Lighting Brightness Levels Selection low, middle and high brightness levels
are available.
Need Attention:To avoid interference by other remote controls with the same frequency, please
pair the lamp with the remote control when using it for the first time.
Pairing method: Hold the Timer Reset Button for 5 seconds until the 4 timer indicators(10/20/30/60
minutes) all light up. The pairing is successful after the indicator lights go out.
Lighting Temperature Selection. Daylight, natural light and warm light are
available.
Adapter Input Voltage
Device Input Voltage
Power Rating
Daylight
Warm Light
Materials
Natural Light
AC 100-240 V
DC 24V. 1A
5500-5700 K
4000-4200 K
2800-3000 K
ABS+PC
2-20W
- 3 -
Reminder
Warranty
1. Before use:
2. When using:
3. After use:
Please do not use the natural energy lamp, if you have an eye disease such as cataracts,
glaucoma, diseases of the optic nerve, and inflammation of the vitreous humor, etc.
Please do not stare at the light of the appliance or it may hurt your eyes.
Eye pain and headaches may arise after the first use. These will disappear later, as
the nervous system accustoms to the new stimulation.
This product has a one-year warranty from the date of purchase. The warranty does not apply
to products which have been lost, altered, broken, or damaged by misuse or failure to follow
the instruction provided with the product.
For any inquiries concerning our products, or if you want to apply for a replacement or refund,
please feel free to contact us by: [e-mail]
Please start with a short period of illumination at the beginning, and gradually increase
the light exposure time.
The most effective period of the treatment is from 6 am. to 8 pm. and we recommend
using it every day.
Keep using the lamp in a poor light season for at least 7 consecutive days or even
longer, depending on your individual needs.
Please consult your doctor before use, if you have diabetics or you are taking medication
such as pain relievers, anti-hypertensive, or antidepressants, etc.
- 4 -
ON/OFF Button
Timer Reset Button
Different Time Settings
Lighting Brightness Levels Adjustment
Press the / button to adjust the brightness. Short
press to adjust for 5 levels of brightness. Long press to
customize yourdesired brightness and then release the button.
Press the button to turn on/ off the natural energy lamp.
Short press the button to turn off the Timer.
Press the 10/ 20/ 30/ 60 minutes button for different timing
settings.
[e-mail]
MADE IN CHINA
This device complies with Part 15 of the FCC rules. Operation is subject to the follo
wing two
conditions:
1) this device may not cau
se harmful interference, a
nd
2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.