User's Manual Part 1
15
©2015 Hubsan
ֻӰ೨ሙNjྠిద
PROPELLER
PROPELLER
Ɣ7KHSURSHOOHUVDUHGHVLJQHGWRDXWRPDWLFDOO\WLJKWHQXSGRQRWVFUHZLWWRRWLJKW'RQRW
use any type of screw glue.
Ɣ0DNHVXUHWKHEODFNDQGJUH\SURSHOOHUVDUHLQVWDOOHGFRUUHFWO\,WZLOOQRWIO\LIWKH
propellers are installed wrong.
ƔWear gloves when installing the propellers to avoid injury. The propellers are thin and sharp.
3.6 PREPARE THE PROPELLER SET
Hubsan X4 Pro equipped with 9 inch propellers--black and grey colors. The propellers are easily
damaged. Please purchase spare propellers from Hubsan.
3.6.1 INTRODUCTION
propeller A propeller B
Diagram
Installation Position
Symbol explanation
LOCK: In this direction, tighten the propeller onto the motor shaft
UNLOCK: In this direction, remove the propeller from the motor shaft
3.6.2 METHOD
3.6.3 REMOVE PROPELLER
Hold the motor with the Propeller removal wrench,
rotate the propellers in unlock direction to remove
the propeller.
A
A
A
Take out the 4 propellers. Install them hand-tight onto the proper A and B motor shafts.