User's Manual

9. TRANSMITTER CALIBRATION

The transmitter mode can be shifted according to the above operation.

Mode 2: Push both sticks to the upper left corner and power on the transmitter simultaneously.

The LCD will display “OH”, rotate both sticks in circles three times, release the sticks and press

any trim for 1.5 seconds until one “Beep” heard which indicates a successful calibration.

Mode 1: Push the left stick to the upper left corner and right stick to the upper right corner and

power on the transmitter simultaneously, The LCD will display “OH”, rotate both sticks in circles

three times, release the sticks and press any trim for 1.5 seconds until one “Beep” heard which

indicates a successful calibration.