Installation Instructions

Fixture Installation Instructions
1:This product is recommended 2:Install the Holder onto the edge of the
use for freshwater or saltwater aquarium. aquarium and secure it with the screws.
The holder must be secured firmly enough to
3:Position the fixture over hole of "Holder" prevent the light from falling into the water.
by adjusting the "Stand bar" to the proper high
so that securely hold the fixture in place. 4:Connect the adapter to the connector
on the side of light fixture.
5:Plug the adapter into an acceptable outlet.
be sure to incorporate a "drip loop" to prevent wate r 6:The light fixture will turn on if the switch
droplets from running down the cord and into
is turned on.
the outlet should any water get onto the cord.
ITEM NO. FITS AQUARIUMS LED qty' Voltage POWER PAR(AVG.) LUMENS
QUAD-40WRGB
12" (30cm);18"(45cm);
20"(50cm);24"(60cm).
42 pcs DC24~26V 40 watt 15mW/c㎡ 2400~2600
Step-01: Scan QR Code to dowload TUYA app and install.
Step-02: Open "TUYA" app and turn on the b ul etooth of your phone(Wifi is no
reques
t
Step-03: Click "Add device", the system will being searching.
Step-04:After discovering devices, click "Add" for loading,
click the "Green" power button in the app.
P02/06
Wifi is no request).