User's Manual

支持机型：可与支持 AAC/HFP/HSP/AVRCP/A2DP 协议的蓝牙设备配合使用，如手机、电
脑等等进行通话、听歌等功能
Model supported: It can be used in combination with bluetooth devices supporting
AAC/HFP/HSP/AVRCP/A2DP protocol, such as mobile phones and computers to make a call or
listen to music, etc.
移动充电盒
Mobile battery case
输入电流：5V\500mA
Input current: 5V\500mA
输出电流：5V\50mA/h
Output current: 5V\50mA/h
充电盒电池容量：600mA/h
Capacity of the battery in the battery case: 600mA/h
充电次数：约 4.5 次
Charge cycles: About 4 .5times
功能介绍
Function introduction
开机：
Power-on:
充电盒开盖自动开机/耳机关机状态下长按 3S 手动开机，白灯常亮 1S，耳机有纯音开机提
示，此时耳机进入回连状态，如附近有曾经配对连接过的设备，将自动回连至该设备，如无
设备，等待约 7 秒 L 主耳自动进入设备配对状态，白灯快闪进入设备配对模式
The earphone will be automatically turned on when the battery case is opened / long press the
power key for 3 seconds to turn on the earphone manually under power-off status and the blue
indicator light is kept on for 1 second, a pure power-on prompt tone is heard, now the earphone is
in a loop-connected status, if there is a nearby device once connected and paired, the earphone will
be automatically loop-connected to such device, otherwise it will wait for about 7 seconds until
the L main earphone is automatically paired and the blue indicator light flashes to enter pairing
mode.
与设备配对连接：
Pair and connect to the device:
打开手机并开启蓝牙，搜索“T59”设备，点击该设备进行配对，连接成功后 L/R 白灯常亮
1S 后熄灭，手机上显示耳机已连接。
Turn on the mobile phone and bluetooth, search for “T59” device, click on device icon to pair and
upon successful connection, the L/R blue indicator light will be kept on for 1 second and then goes
out, now the connection status of the earphone will be shown on the mobile phone.
恢复出厂设置：
Restore factory settings: