Installation Guide

4ch Smart Light Switch
SERIES：Platinum the following series
directory
1. Product introduction
2. Product list
3. Installation guide
4. Schematic diagram of networking
5. Product parameters
6. Matters needing attention
7. Technical support
一、product introduction
ZigBee wireless 2.4g technology is adopted to realize local and remote intelligent
control through "huayi" APP.
Choose aviation grade aluminum alloy material, lighting and scene function two
in one, optional combination switch.
With body induction, close to automatic awakening, custom text display.
Support temperature, illumination detection, alarm information synchronization
prompt.
Perfect compatibility with the type 86 universal bottom box industry standard,
seamless replacement installation.
二、Product list
Before using this product, please check whether the goods in the package are
complete, if there is a lack, please contact the after-sales center.
1 x products
1X product manual
1X product warranty card
1 x certificate
2X flat screw
三、Installation guide (drawing sketch)
1. This product is divided into two parts: a. panel; B. Switch bottom box.
2. Remove panel a from the bottom of the product.
3. Correctly connect the circuit according to the wiring label of switch bottom
box.
Note: make sure the power is off
4. Fix the switch bottom box on the type 86 universal bottom box with 2 screws.
5. The installation of upper panel a is completed.
四、network diagram
1、Scan the qr code to download the APP
Android
IOS
Model No.: H101-SK-LI40