User's Manual

Attaching/Removing the Antenna

Attaching the Antenna

1. Align the threaded end of the antenna with the antenna connector located on the

radio’s top side.

2. And turn the antenna clockwise to fasten it. See Figure 5.

Figure 5

Removing the Antenna

Turn the antenna counter-clockwise until you can remove it.

Attaching/Removing the Belt Clip

Attaching the Belt Clip

Unfasten the two screws for belt clip by a screwdriver, then place the belt clip on the radio

and align its two holes with two threaded holes of the radio, and secure the two screws

again. See Figure 6.