User's Manual

21
Figure 1 Normal Scan Sequence
Priority Channel Scan
Suppose there is a scan list of 5 channels and Channel 2 is prioritized as Priority 1, the
scan operation may proceed in the following sequence, as shown in Figure 2.
Figure 2 Priority Scan Sequence
z Scan On/Off
You can enter Scan mode through any of the following two methods:
Key-operated Entry
Press the programmed Scan key to enter Scan mode, provided that there are no less
than 2 channels in the scan list. Press the Scan key again or power the radio off to exit
this mode.
Auto Entry
If Auto Scan is enabled on a channel, the radio will automatically enter Scan mode
when it switches to this channel. When it switches to other channels or is powered off, the
radio will exit from Scan mode.
z Talk Back
This option defines whether users can talk back on the channel where scanning pauses.
Checked: When the radio is staying on a scanned channel, it transmits on the scanned