User's Manual

channel; when the radio is not staying on a scanned channel, it transmits on a

preset channel.

Unchecked: The radio transmits on the preset channel.

z Priority Scan

This function enables users to scan the most frequently used channel so that messages

will not be missed. The priority channels are programmed by your dealer via programming

software. Please contact your local dealer for more information.

Note: Even though the radio stays on a non-priority channel, activities on the

priority channel are still under detection. The radio will switch to the priority channel once

any activity is detected.

z Available Keys in Scan Mode

PTT key, Volume Control key [+]/[-], Squelch Off, Squelch Off Momentary, Monitor and

Monitor Momentary.

Busy Channel Lockout (BCL)

This function can help avoid interference between radios operating on the same channel.

When the channel is already in use, the radio will sound a continuous warning tone and

return to Receive mode upon PTT press. To cancel the tone, release the PTT key.

Low Battery Alert

When battery power runs low, the Status Indicator flashes red and a low-pitched tone will

sound at an interval of ten seconds to remind users to replace the battery or charge the

battery.

Voice-Operated Transmit (VOX)

With the dedicated VOX earpiece, you can enjoy hands-free communication. After this

function is enabled, the radio will automatically begin transmitting when you speak, and

terminate transmitting when you stop talking, with no need of PTT press.

Operation Steps:

1. Push the PTT/VOX switch on the earpiece to VOX.