User's Manual

z Group members may be too far away from

each other. Please make sure that you are

within the communication range.

Hear non-group members.

z The CTCSS/CDCSS settings should be

changed for all radios in your group by your

dealer.

No voice or low voice received from

the transmitting party.

z Please ensure an adequate volume level is

selected.

z Or please send the radio to your dealer for

microphone examination.

Noises always on.

z In Monitor mode, group members may have

been too far away from each other. Please

move within the communication range and

then re-power the radio on.

z Please confirm whether there is strong

interference near the radio.

Care and Cleaning

z Do not hold the radio by its antenna or external earpiece directly.

z Do not place the radio in a dusty or dirty environment.

z Clean the radio with a lint-free cloth to remove dirt or grease, to avoid poor contact

due to excessive dust.

z Clean the radio using a lint-free cloth moistened with clean water and a mild

dishwashing liquid.

z Avoid subjecting the radio to corrosives, solvents or spirits.

Optional Accessories