User's Manual

6
Note: Short Press means key press shorter than 1 second, while Long Press
means key press longer than 1 second.
﹡LED Indicator
Status indications and alert tones are shown in the table below:
Power On (to enter User Mode)
When the radio is turned on, an alert tone sounds and
the Status Indicator flashes orange once.
When the radio is currently on a blank channel, it
sounds beep tones continuously.
Power Off
When the radio is turned off, the power-off alert tone
is heard.
Low Battery Alert
The Status Indicator flashes red, and a low-pitched
tone sounds at an interval of 10 seconds.
Transmitting
The Status Indicator glows red.
When TOT timer expires, the radio sounds beep
tones continuously.
A TOT pre-alert tone sounds before the TOT timer
expires.
Receiving
The Status Indicator glows green when carrier is
present.
Scanning
The Status Indicator flashes green once per second,
while scanning is in process.
Scan Start Alert (programmable by the dealer): one
beep is heard.
When signals are received on a certain channel, the
Status Indicator solidly glows green.
Scan End Alert (programmable by the dealer): one
beep is heard.
Power Adjustment
A low-pitched tone is heard when the radio switches
from high power to low power.
A high-pitched tone is heard when the radio switches