User's Manual

preparation in advance to avoid potential inconvenience.

Assembly and Disassembly

Attaching the Battery

1. When attaching the battery, make sure the battery is in parallel and good contact with

the aluminum chassis. The battery bottom is about 1 to 2 centimeters below the

bottom of the radio’s body.

2. Align the battery with the guide rails on the aluminum chassis and slide it upwards

until a “click” is heard.

3. The battery latch at the bottom locks the battery. See figure 1.

Figure 1

Removing the Battery

1. Turn off the radio before removing the battery.

2. Slide the battery latch, at the bottom of the radio’s body, in the direction indicated by

the arrow.

3. Slide down the battery for about 1 to 2 centimeters, and then remove the battery from

the radio’s body. See figure 2.