User's Manual

TC-980 Owner’s Manual
23
Figure 1
Priority Channel Scan
If you prioritize Channel 2 as Priority 1, the scan operation would change as figure 2 shown
below.
Figure 2
Scan On/Off
You can enter scan mode through the following two methods:
1. Key operation
Press the programmed Scan key to enter scan mode, provided that there’re no less than 2
members in the scan list.
2. Auto
When Auto Scan is enabled for a channel, the radio shall automatically enter scan mode when it
is switched to the channel.
You can exit scan mode through the following three methods: