User's Manual

TC－1600 Owner’s Manual
10
Getting Started
1
2
3
4
5
6
7
10
11
12
13
14
15
16
17
MON
1. Antenna
2. PTT key
In normal work mode, press the key to transmit (no button beep) either in standby or
menu mode. When the key is pressed in menu mode, the channel information will be
displayed on the screen at the same time. And the display returns to its original
display when the PTT key is released.
3. MENU key
Press the key in standby mode to display current channel information. Press and hold
the key to enter setting mode. When setting the parameters, press the key to confirm
your setting and move to another setting item,.
4. “
“ key
Press the key in standby mode to transmit CALL signal (Special frequency or
frequency combination code). Press and hold the key to lock/unlock the keypad. In
menu mode or setting mode, press the key to confirm the setting and return to the
first item. Press the key when setting the first item to exit.
5. DOWN (-) key
Down key or minus key. The key is also used as channel or interference-eliminate