User's Manual

TC－1600 Owner’s Manual

code (CTCSS or CDCSS) selector. Press the key in menu mode to go to your

required setting item. When channel information is displayed on the screen in

standby mode, press the key to go to next channel. Press and hold the key to scroll

the channels at the speed of 250ms per channel.

6. Moni key

Press the key in standby mode to enter channel-scan mode. Press and hold the key

to monitor the activities on current channel.

7. Up (+) key

Up or plus key. The key is also used as channel or interference-eliminate code

(CTCSS or CDCSS) selector. Press the key in menu mode to go to your required

setting item. When channel information is displayed on the screen in standby mode,

press the key to go to next channel. Press and hold the key to scroll the channels at

the speed of 250ms per channel.

8. Strap hole

9. Power/Volume Knob

Turn the knob clockwise until a “click” is heard to turn the radio on; fully counter

clockwise to turn it off. When the radio is on, turn clockwise to adjust volume up and

counter clockwise to volume down.

10. Display

Used to display channel number, frequency code and interference-elimination code

and other parameters.

Please refer to Display section for details.

11. Earphone Jack and programming port

12. Microphone Jack (MIC)

Used to input voice.

13. Speaker Jack (SPK)

Used to output voice.

14. Battery Latch

Press and push the latch to release the battery.

15. Belt Clip

Used to wear your radio on the belt for easy carry.

16. Battery

17. Charging Connectors

Contact the connectors with the electrode piece oUsed to wear your radio on the belt

for easy carry.