User's Manual

TC－1600 Owner’s Manual
18
frequency number flashes (See figure7). Press “+” / “-” key to select frequency number
from 1 to 56. Press MENU key to confirm the setting and switch to the next setting. Press
“
” key to save the setting and return to the first setting or to exit channel setting mode.
This feature can be enabled/disabled by the dealer.
The factory default setting for frequency number of each channel is shown as following:
Channel Number 1 2 3 4 5 6 7 8
Frequency Number 7 15 16 31 34 45 48 52
Fig 7 Set Frequency Number
Set Interference Eliminator Code
When setting interference eliminator code of the channel, “CODE” icon appears on LCD
and the interference eliminator code flashes (See figure8). Press “+” / “-” key to select
interference eliminator code from 0 to 121. If “0” is selected, interference eliminator code
is not set in a channel.
Press MENU key to confirm the setting and switch to the next setting. Press “
” key to
save the setting and return to the first setting or exit the channel setting mode.
This feature can be enabled/disabled by the dealer.
In factory default setting, interference eliminator code is not set in all channels.
Fig 8 Set Interference Eliminator Code
Set the number of available channels
When setting the number of available channels, “CH ”icon appears on LCD and the
channel number flashes (See figure9). Press “+” / “-” key to select number of available
channels from 1 to 8.
Press MENU key to confirm the setting and switch to the next setting. Press “
” key to
save the setting and return to the first setting or exit the channel setting mode.
Blink
Blink