User's Manual

TC－1600 Owner’s Manual
21
Set Button Beep
When setting button beep, “bP” icon appears on LCD and the character “y” or “n” flashes
(See figure20-1). “y” indicates enabling button beep and “n” indicates disabling.
Press “+” / “-” key to select between “y” and “n”. Press MENU key to confirm the setting
and switch to the next setting. Press “
” key to save the setting and return to the first
setting or exit menu mode.
In factory default setting, the button beep is enabled.
a. Enable Button Beep b. Disable Button Beep
Fig 14 Set Button Beep
Set Squelch Level
When setting squelch level, “SQL” icon appears on bottom left corner of the LCD and the
squelch level flashes (See figure15).
There are four squelch levels (1-4). Higher squelch level makes it harder for the radio to
receive weak signals and avoid interference of noises and/or unwanted signals.
Press “+” / “-” key to select squelch level. Press MENU key to confirm the setting and
switch to the next setting. Press “
” key to save the setting and return to the first setting
or exit the menu mode.
In factory default setting, squelch level is set as 2.
Fig15 Set Squelch Level
Set Communication Range Alarm
When setting communication range alarm feature, “
” icon appears on the left of LCD
and the character “y” or “n” flashes (See figure16). “y” indicates enabling communication
range alarm and “n” indicates disabling.
Press “+” / “-” key to select between “y” and “n”. Press MENU key to confirm the setting
and switch to the next setting. Press “
” key to save the setting and return to the first
setting or exit menu mode.
Blink Blink
Blink