User's Guide

http://www.idea-a.com.cn
深圳壹智云科技有限公司第 16 页 / 共 19 页
10. Common faults and solutions
N
NN
NO.
O.O.
O.
fault
fault fault
fault
condition
conditioncondition
condition possible cause
possible causepossible cause
possible cause solution
solutionsolution
solution
1
Robot can't be
charged
The robot is in a deep
discharge state
Activate the battery, manually
place the robot on the charging
stand, charge it for three minutes
and move it out. After repeating
the action for three times, charge
it normally for more than two
hours
The power adapter or
charging socket is not
connected
Connect adapter power correctly
2
Robots work
short hours
The working time
varies
due to the pavement
environment and load
/
Due to deep discharge,
the battery does not
have enough power to
work
Activate the battery, manually
place the robot on the charging
stand, charge it for three minutes
and move it out. After repeating
the action for three times, charge
it normally for more than two
hours
3
No light, no wind,
no fog
The sprayer power
button is not on
Retouch the sprayer power button
4
The light is on,
but there is no
mist
Pedestal overwater
Pour some of the water out of the
base and reboot
5
Spray quantity is
little
More scale or too much
impurity in water
Cleaning atomizer
6
The liquid can't
reach the base
The storage tank is dirty
or not well placed
Clean water storage tank and
install water storage tank correctly
The liquid in the tank
exceeded its maximum
level
Reduce the water in the storage
tank to no higher than the
maximum water leve
10
Voice prompt:
"robot dangling,
please handle"
The robot hangs in the
air as it moves
First check whether the driving
wheel of the machine touches the
ground, and then shift the robot
to the horizontal ground
11
Voice prompt:
"robot active
wheel winding,
please remove
winding"
The robot winds around
other objects as it
moves
Check if there is any foreign
matter in the driving wheel and
clean the driving wheel