HD Conference Camera with Wireless Speakerphone (Camera Part) AUCTOPUS I-1208 (Camera Part) User Manual V1.0.0 Shenzhen Innotrik Technology Co.
Content Legal Statement 01 Preface 02 Safety Precautions 03 1 Product Overview 04 1.1 Production Introduction 04 1.2 Features 04 1.3 Package list 05 1.
Legal Statement Copyright Statement © Shenzhen Innotrik Technology Co., Ltd . All rights reserved. Information contained in this document should not be reproduced, spread, distributed or stored by any person in any form without prior written license of Shenzhen Innotrik Technology Co., Ltd (hereinafter referred to as "Yinluo”). The products referred to in this document may contain software proprietary to Yinluo or, probably, a third party.
Preface Overview This document describes in detail the quick configuration of the AUCTOPUS I-1208 series. Symbol Conventions For the purpose of this document, the following signs that may exist herein mean as below: Symbol Danger Warning Caution Anti -static Protection Description Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Safety Precautions Before using the product, read and abide by the following requirements to prevent damage to the product or your belongings. Caution · Transport, use, and store the product only under the appropriate temperatures and humidity. · Install the product in a well-ventilated place and do not block the device's air vents. · Install the product in a steady place. · Do not place the product in damp, dusty, or smoky areas. · Do not place the product in direct sun light or near a heat source.
1 Product Overview 1.1 Product Introduction AUCTOPUS I-1208 is a separate audio-video conference camera,configured with 120 ° shooting angle,1080P HD webcam and 2.4 G wireless speakerphone, suitable for small and medium-sized conference scenes, personal business, home or leisure place. 1.
1 Product Overview 1.3 Package list Please check whether the materials are complete according to the following table when opening the box.
1 Product Overview 1.4 Component description Part 1: HD network camera Lens Lens clamp Horizontal shaft Clamp Adjustable base (option) USB cable Part 2: 2.4G wireless speakerphone Triangular Indicator Mini USB interface 3.
2 Connection Connect HD camera to PC and long press to power on speaker phone,long press again to power off.
3 Operating Description ·Connecting USB line to computer, the following tips will appear in the lower right corner of the computer when first time using. .
3 Operating Description ·Another way to check whether AUCTOPUS I-1208 is being used on the computer, click the "speaker" icorn,and then it will show as following: ·Click "audio device" or "display devices",and then it will shows: ·Check whether the default device is AUCTOPUS I-1208, if not, select it as the default one and the it can work as normal. **This operation works under Win 7 and it will be some difference in other operating system.This document can be as a reference .
3 Operating Description ·If the color and resolution of video are found to be abnormal, it can be used in camera adjustment special software “Amcap”to check. Check the output size of the white balance and video for the corresponding values. Check the white balance option with a default value of 4600 Video output size, select 1920*1080 Or change the camera effect to "restore the default effect" in instant messaging software.If it still cannot fix it, please contact our after-sales service .
4 Specification Specification Description Dimension Camera:104*139*124mm Speakerphone:155*148*37mm Net weight Camera:500g Speakerphone:337g Color Black Interface USB 2.0 Battery(speakerphone) Built-in lithium battery (7-10H) Lens 1/2.8, fixed focus, 120 degree Angle Sensor Full HD CMOS sensor Voice pickup range 3m max Video 1920*1080 Image transmision speed Up to 30FPS Aperture coefficient F2.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
