User's Manual

36
Access Control
Click Wireless > Access Control to enter page below. This page allows you to specify a list of devices to allow
or disallow a connection to your wireless network via the device's MAC addresses. To deactivate this feature,
select "Disable"; to activate it, select "Allow" or "Deny".
 SSID: Select the SSID you wish to configure access control setting.
 MAC Filter Mode: Select Disable to disable Access Control function. Allow: Only MAC addresses in
the access control list are allowed to connect to the SSID. Deny: MAC addresses in the access control list
are not allowed to connect to the SSID.