User's Manual

39
D. Configure the port on the switch connected to hotel executives to be VLAN10 tagged, the port connected to
hotel stuffs to be VLAN20 tagged and the port connected to customers to be VLAN30 tagged.
SNMP
The Simple Network Management Protocol (SNMP) is widely used in local area networks (LANs) for
collecting information, managing, and monitoring network devices, such as servers, printers, hubs, switches,
and routers. Specialized software in each SNMP capable device, known as an Agent, continuously monitors the
status of the device and reports the results to the SNMP Manager software, which can then act on the report.
Click SNMP to enter screen below:
 SNMP: Disable or Enable the SNMP function.
 Read Community: Indicates the community string for read access to permit reading this AP’s SNMP
information. The default is Public.
 Write/Read Community: Indicates the community string for write/read access to permit reading and
re-writing this AP’s SNMP information. The default is Private.