User's Manual

44
❷ Log Server IP: Specify the IP address of the syslog server in your LAN.
❸ Log Server Port: Specify the port of the syslog server in your LAN (If not allowed to configure a port on
your server, enter the default value 514, or enter the remote server’s port number.).
❹ Check Enable.
❺ Click Save.
❻ Check the "To use the following rules, you must check this box." option.
If configured successfully, the system will begin to log events and simultaneously send them to the specified log
server in your LAN. You can view all logs there.