User's Manual

50
5 Appendix
Troubleshooting
Q1: Power LED troubleshooting
You can know whether the power system of this AP is functioning normally or not in terms of its power LED
status. If the system is functioning normally, the Power LED should be lighted or blinking; if the Power LED is
off, please verify that:
1. Power cord is correctly connected and the Power ON/OFF switch is on.
2. The power supply accords with the rated power input.
3. The AP is connected to its PoE injector correctly.
Q2: I enter the device’s LAN IP address in the web browser but cannot access this device’s web page.
What should I do?
1. Check the TCP/IP settings on your PC and verify that IP address is 192.168.0.X (2-253);
2. Clear the browser cache or try another web browser;
3. Ensure the wireless NIC is functioning properly.
If you are still unable to login, please restore the device to factory default settings and follow this user guide to
configure your settings again.
Technical Support
Website: http://www.ip-com.com.cn
Tel: [phone]
Email: [e-mail]
Skype: IP-COM.Support