H.265 HEVC/H.
1.Interface Power: DC 9-12V 1A ANT: HG WIFI HDMI IN: HDMI Video Input Port Power: Power Light(Red) Reset:Recovery to Default setting LAN: Lan Status Light(Green) LAN: 1000M Ethernet Port Video: Video Signal Light(Blue) WIFI:it is AP when it is blink,it is connected it is always bright. Instructions： A. Power ----9-12 V/DC 1A; B. Reset----- it is used to reset the equipment; after the equipment is started, press the button for 10 seconds, the equipment IP is recovery to the default IP, 192.168.1.168. C.
2.Specification Input Video 1.4 HDMI HDCP HDMI resolution ratio 1920x1200_60P,1920×1080_50/60P,1920×1080_50/60i, 1280×720_50/60p 720x576i/p 720x480i/p. Encoding H.265 HEVC or H.264 AVC Profile 4.2 Bitrate 16kbit/s～32Mbit/s Bitrate control CBR/VBR GOP Adjustable Audio: Encoding AAC AAC+ AAC++ MP3 MP2 AC3 G.711A/U Re-Sampling rate 44100/48000 Bitrate 48K，64K，96K，128K，160K，192K，256K Sampling precision 24 bit Bitrate 64Kb/s~384Kb/s System: Network 100M/1000M Base-T Ethernet /WIFI 2.
3. System Setting ： 3.1 Reset there is a RST hole on the front panel which is used to conduct initialization reset for the high-definition encoder. When the equipment is powered on, press the button and hold for 12 Seconds, when the power light is off, release the button, and all the parameters will be initialized. The initialized IP is 192.168.1.168. 3.2 Computer IP Address Setting Computer IP can be set as 192.168.1.*. Note: anyone from 1－254, except for 168 3.3 Open IE Explorer Fill http://192.168.1.
3.4.2 main stream : it shows main Stream Encoding Type,Resolution,Bitrate and access address 3.4.3 Sub stream: it shows Sub-Stream Encode Type ,Resolution Bitrate and access address 3.3.4 Preview: a.
b.open VLC software to play stream default http stream address:http://192.168.1.168/0.ts default rtsp stream address:rtsp://192.168.1.
4. Network Setting 4.1 Ethernet Port Instructions: in terms of IP address of the equipment, the factory default is 192.168.1.168. If you forget the IP address after modification, you can reset the equipment by pressing the rest button for 12 seconds when the equipment is powered on, and restore the factory default ip. 4.2 WIFI/AP SETTING 4.2.
AP（Access Point）mode is default wireless status. Default AP name is AP_Encoder_XXXX,you can sercah hotspot on smartphone or laptop.Default pass is 12345678. Wifi band supports 2.4G/5.8G Wifi channel: if wireless transmit is jam,you can try to swtich channel You also can check ap information on status page. 4.2.
Fill correct hotspot name and pass and wifi ip.Click Apply botton,reboot You will check the connection information on status page. If the wifi level is under 60%,please check environment,it is better to visual range away from router. 5. Main Stream Encoding Setting 5.1Encoding Setting of Main Stream 5.1.1 Encoding Type: H.264 or H.265 or Mjpeg 5.1.2 Encode level: baseline profile / main profile / high profile 5.1.3 Encoding frame rate: 5-60 frames（it can output 60p When Input is 60p) 5.1.
544x480,480x480,480x384,480x360,480x320,480x272,480x720,400x320 ,400x224,352x480,352x228,320x256,320x240,320x180,240x180,176x 144 5.1.7 Video bit rate: 16-32000K 5.2 Main Stream Protocal Setting UTP protocol(Private) ,Default address http://192.168.1.168/0.utp HTTP protocol,Default address http://192.168.1.168/0.ts HLS protocol,Default address http://192.168.1.168/0.m3u8 FLV protocol,Default address http://192.168.1.168/0.flv RTSP protocol,Default address rtsp://192.168.1.
5.3 OSD Setting 5.3.1 Zone 1-4,you can enable max to 4 image or txt Text, support English/number Character Image, support 24bit BMP file ,less than 500KB,transparency color is R:241 G:241 B:241 5.3.2 X coordinate: the left and right positions displayed by 0-1920 text. Y coordinate: the up and down positions displayed by 0-1080 text. 5.3.3 font: the size of 8-72 text display in the display screen. 5.3.4 Alpha: 0-128 , transparency 5.3.5 Logo: select logo files 5.
2.Create a live stream channel 3.Copy rtmp address from Youtube The whole address(part 1+part 2) is rtmp://a.rtmp.youtube.com/live2/87gg-dtd0-7atc-8zwu 4.
Paste whole rtmp address Enable it Click Apply botton 7. Instructions for Facebook Streaming 1.
2. Copy rtmp address from Facebook The whole address(part 1+part 2) is rtmps://live-api-s.facebook.com:443/rtmp/143998560119176?s_bi=1&…….
Paste whole rtmp address Enable it Click Apply botton 8. Audio Encoding Settings Audio Bit rate: 48K, 64K, 96K, 128K, 160K, 192K and 256K Audio type: AAC,AAC+,MP3, MP2,AC3,G711A,G711U Audio resample: 44100,48000 9. System Settings 9.
9.2 Software upgrade 9.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
