User's Manual

Product Manual Smart TV Controller-3D Motion Sensing
Led Light Indicator
The dual colored LED indicator (Red/Blue) is located in the upper front of the controller. The
light indications of different status are described as follows:
Condition
Color
Description
Active Mode (with operations)
Blue
Stable blue light
Active Mode (with no operation)
Off
Battery level less than 10%
Red
Flash per 0.5 second for five times
with 5 min interval;
Battery level less than 5%
Red
One flash every 1 second
Charging
Blue
Flash every 2 seconds
Fully charged
Blue
Stable light until disconnection
Battery level more than 10% & Turn on the
controller
Blue
Keep flashing for 15 seconds
Batter level less than 10% & Turn off the
controller
Red
Flashing for 15 seconds
Connecting manually
Blue
Rapid flashing every 250ms
Manual connection success
Blue
Stable light for 5 seconds
Manual connection failure
Red
Stable light for 5 seconds
Battery level more than 10% & Wake-up
status
Blue
Stable light for 10 seconds
Battery level less than 10% & Wake-up status
Red
Flashing for 10 seconds
Total: 8 Led Light Indicator Mode
Mouse Control Function
The controller is built in with a 3D motion sensing engine, a motion capture system used for
input devices. It adopts a 3-axis gyroscope and a 3-axis accelerometer to calculate projected
X and Y displacement, roll angle, rotation intensity and force intensity. By fusing the
gyroscope and accelerometer outputs, an adaptive reduced filter algorithm is also used to