User's Manual

Product Manual Smart TV Controller-3D Motion Sensing
Please wait with patient, once the red flashing light goes off, the device get ready for
use.
 Active Mode
Under Active Mode, when there is any detectable movement associated with the device,
the led indicator will keep flashing in blue; and when there is no movement, the blue
light goes off automatically.
 Air Mouse Control Function
This product performs precise and stable mouse control function by hand movements (a
more effective way, as suggested, is to control by wrist instead of by arm movements). It
can also perform drag function by moving the cursor to the selected object, then press
and hold the OK button. Release the OK button when the object is dragged to the
intended position.
 Calibration
It is due to the nature of motion sensing mechanism. While using the controller,
sometimes you may find the cursor is not well placed in accordance with the position
you want. For example, you want the cursor to keep moving to the right while your wrist
reaches its maximum range to the right. At this point, you just need to give the
controller a little shaking horizontally. The controller will then recalibrate itself and the
cursor should resume to the position you feel comfortable with.
 Sleep Mode and Wakeup Mode
The device turns into Sleep Mode automatically once the device is left in no use for a
while, and the device can be woken up any time when it is picked up. However, there exit
chances that some movements might be too weak to activate the device. When it is the
case, a little shake should help wake it up.
 Charging
With Power Switch on, the device starts being charged when it is connected with the TV
box via a USB cable or to any power adaptor with USB plug-in. The led indicator should
keep flashing in blue light during the course of charging, and the blue light should keep
on till the USB cable is disconnected.
 Low Battery