User's Manual

Product Manual Smart TV Controller-3D Motion Sensing
Anytime when the device detects low battery power (<10%), the led indicator should
start flashing in red light for 30 seconds in every 3 minutes.
 Surrounding Temperature
When there is dramatic change in the surrounding temperature, it may cause the cursor
drifting somehow. For example, when the device is brought into an air-conditioned room
from hot outside, a few seconds of cursor drifting may occur to the device.
INSTRUCTION
Turn on the TV box and Controller
 Turn on the motion-sensing smart TV controller, the switch-on button is located at the
back of controller;
 Click the TV box power button to turn on the Android TV box. The power control key is
located at the top left side of the controller. ,
Receiver
The accompanied USB receiver is stored in the slot section under the battery cover. Plug the
USB receiver into the USB port in the TV box.
Manual Connection
In case that the controller is not automatically connected to the box after turning the unit on,
press the pairing key and the Led indicator will begin flashing; unplug the receiver and
re-plug it into the box. Once it connects successfully, the Led light indicator on the front of
controller will stay blue for 30 seconds.