User's Manual

JW1582,JW1583 User manual
1. Press the RADIO button (Fig.4).
2. Use the AM/FM switch located on the back of the unit (Fig.3) to change
between bands.
3. Rotate the TUNER (Fig.1) to select a radio station.
4. To adjust the volume-turn the VOLUME knob (Fig 1) to your desired level.
5. When finished listening to the radio may turn it off by pressing the FOWER
button. (Fig.4)
Note: Adjust the antenna on the back of the unit to better the radio
reception if needed.
Using the Auto –Timer
When the power is on and you are listening to a nature sound or the radio you
may set a timer so the unit will automatically turn off.
1. Toggle through the TIMER button (Fig4) until the corresponding outline
border around the time of your choice, 15,30 or 60 minutes.
Setting and Using The Alarm
Setting and using Alarm 1 or Alarm 2 (Individually)
1. Slide the alarm switch to Alarm 1or Alarm 2. (Fig.3) An ALARM BELL (Fig.2)
icon will appear on the LCD display.
2. Press the ALARM Set button. (Fig.4) The time will flash.
3. While the time is flashing press the HOUR button (Fig 1) until you reach
the correct hour. Then press the MIN button (Fig 1) until you reach the
desired minute.
4. After 5 seconds the alarm set time will stop flashing and it will be
programmed, or you may press the ALARM SET button to confirm.
Note: The PM indicator also applies to the alarm.
5. You may choose one of 3 wake options: BEEP, SOUND, or RADIO by
pressing the AL-SOUND_SELECT button. An outline border will around
the wake mode selected. (Fig.4)
JW1582,JW1583 User manual
Note: When using the sound mode, the unit will set to the last sound you
listened to. If you wish to change it press the sound you wish to wake to
(Fig.5) and then press the POWER button (Fig 4).
6. When the alarm sounds you may:
a. SNOOZE: Press the SNOOZE button (Fig1). Your sleep time will be
extended by 9 minutes .You may use this feature until you turn the alarm
off.
b. RESET: Turn the alarm off by pressing ANY button on the unit, except for
the SNOOZE button (Fig 4). The alarm clock will automatically reset for
the next day in its current mode. The ALARM BELL icon and outline
border will remain displayed to indicate the alarm is set. If you wish to
change the wake mode follow step 5 under Setting and Using Alarm 1
and Alarm 2 individually.
c. OFF: To completely turn off the alarm so it is not set for the next day, slide
the alarm switch to OFF.
Note: If the alarm sounds for 30 minutes continuously it will
automatically turn off.
Setting and using ALARM 1 and ALARM 2 (Together)
1. Slide the alarm switch to ALARM 1&2 (Fig.3) Both ALARM BELL (Fig.2)
icons will appear on the LCD display.
Note: You can not change the alarm time when ALARM 1&2 is selected. If
you need to change the alarm time for either alarm follow step 1 under
Setting and Using Alarm 1 or Alarm 2.
2. You may choose one of 3 wake op options; BEEP, SOUND, or RADIO by
pressing the ALARM MODE button. An outline border will around the wake
mode selected. (Fig.4)
Note: When using the sound mode, the unit will set to the last sound you
listened to. If you wish to change it press the sound you wish to wake to
(Fig.5) and then press the POWENR button (Fig.4).