User's Manual

the pairing is successful,the blue indicator will light and the device sounds a beep.In some
phones you may need to make the connection separately after pairing.
You can set your phone to connect with the device automatically when the device is
swiched on.
To disconnect the device from your phone,pull the device out from the cigarette
lighter socket,or disconnect the device in the Bluetooth menu of the phone.
To pair and connect the device with a new phone,first disconnect the device in the
Bluetooth menu of the currenty connected phone,and then pair and connect the new
phone.
To pair and connect the device with the second phone,press and hold the call key 6
seconds,the green and red indicators flashs green and red alternatively,and then pair
and connect the second phone.If pairing is successful,the first phone can only make
and receive hands-free calls.
Call handling
Once pairing is completed,you may access the following function.Some of the
below-mentioned function is only accessible for handsets supported with hands-Free
profile.
1,To adjust the volume during a call,use the volume turning on the device.
2,To answer a call,wait for the device to ring,then short press the call key to accept the
call or answer the call via your phone in the normal way.The green indicator light.
3,To end a call,short press the call key or end the call via your phone in the normal
way.
4,To reject a call,when you hear the ringing tone,short press the call key twice.
5,To redial the last number,if your phone supports last number redial with the
device,short press the call key twice when no call is in progress.
6,If your phone supports voice dialing with the device,press and hold rhe call key 3
seconds when no call is in progress, and proceed as described in the user guide of
your phone.
7,To transfer the active call between the device and your phone,pres and hold the call
key.
Care and maintenance
Your device is a product of superior design and craftsmanship and should treated with
care.The suggestions below will help you protect your warranty coverage.
1,Do not expose the device to liquid,moisture or humidity, as it is not waterproof.
2,Do not use abrasive cleaning solvents to clean the device.
3,Do not place the device in high temperature,as it will result in an explosion.
4,Do not expose the device to contact with sharp objects as this will cause scratching
and damage.
5,Do not stick anything inside the device as this may damage internal components.
6,Do not attempt to disassemble the device,as it does not contain serviceable
components.
7,If you do not use the device for long periods,be sure to store it in a dry place,free
from extreme temperature,humidity and dust.