User's Manual

Version Number: 1.0
12
App 07 App 08
e) Checking the measurement
In the frame of home interface, it will show the last measurement as picture App 09. You can
check the measurements with detail by clicking the History button as picture App 10 and app
11 .
2) Operate on the device
Press the Stop/Start button as the power on (blue indictor is turned on). The pump begins to
inflate the cuff. After automatically reaching an individual pressure, the pump stops and the
pressure slowly falls. The device will speak out the result after the measurement is finished.
Recommended Use Methods:
1. Recommendation that the PATIENT relax as much as possible and not talk during the
measurement PROCEDURE.
2. Recommendation that 5 min should elapse before the first reading is taken.
App 09 App 10
App
11