User's Manual Part 2

· Boot Device Priority

To set the booting priority.

· Hard Disk Drives

To set the booting priority of hard disk devices.

· Removable Drives

To set the booting priority of removable devices.

· CD/DVD Drives

To set the booting priority of CD/DVD-ROM devices.

6. Security Setup

If this function is selected, the following information will appear:

Enter New Password hhhhhh

Fig 3.9

Then, enter the password with not more than eight characters and press

<Enter>. BIOS will requires to enter the password again. Once you enter

it again, BIOS will save the set password.

Once the password item is enabled, you will be required to enter the

password each time before the system goes to the set program of BIOS.

The user can set this item through the Security Option in advanced BIOS

properties. If the item Security Option is set as System, the password will

be required to be entered before the system guides and goes to the set

program of BIOS. If set as Setup, the password will be required to be

entered only before the system goes to the set program of BIOS.

To delete the password, press <Enter> in the popped-up window that

requires to enter the password. Then, information for confirmation will

appear on the screen to allow you decide whether the password is disabled.

Once the password is disabled, you won't have to enter the password and

can enter the setup program directly when the system is restarted.

Boot Sector Virus Protection

This item is used for setting the alarm function in the case of virus attack in

IDE disk sector. If this item is set as Enable and some program wants to

write information in the sector, BIOS will display alarm information on the

screen and buzz.