User's Manual

用户手册
User Manual
BY-XM6-S1
BY-XM6-S2
Microphone
2.4GHz 迷你双通道无线麦克风系统
BY-XM6-S1 (1×BY-XM6 RX + 1×BY-XM6 TX)
1× BY-XM6 RX Receiver
1× BY-XM6 TX Transmitter
2× USB-C Charging Cable
1× Lavalier Microphone
1× Mic Clip for Lavalier Microphone
1× Foam Windscreen for Lavalier Microphone
1× Fur Windshield for Built-in Microphone
1× 3.5mm TRS to TRS Output Cable for Cameras
1× 3.5mm TRS to TRRS Output Cable for Smartphones
BY-XM6-S2 (1×BY-XM6 RX + 2×BY-XM6 TX)
1× BY-XM6 RX Receiver
2× BY-XM6 TX Transmitter
3× USB-C Charging Cable
2× Lavalier Microphone
2× Mic Clip for Lavalier Microphone
2× Foam Windscreen for Lavalier Microphone
2× Fur Windshield for Built-in Microphone
1× 3.5mm TRS to TRS Output Cable for Cameras
1× 3.5mm TRS to TRRS Output Cable for Smartphones
Packing List
BOYA BY-XM6 systems are incredibly lightweight, ultracompact and
easy-to-use wireless microphone systems for up to 2 people.
The microphone delivers exceptional, broadcast-quality sound to DSLR,
mirrorless and video cameras, smartphones, tablets, computers, etc.
It is ideal for content creation, vlogging, mobile journalism, and more.
Model
BY-XM6-S1
BY-XM6-S2
In the box
1×BY-XM6 RX
1×BY-XM6 TX
1×BY-XM6 RX
2×BY-XM6 TX
General Introduction
Available Kits
BY-XM6 RX Receiver
Transmission Type
Modulation
Operating Range (without obstacle)
Audio Output Connector
Audio Output Level
Power Requirements
Built-in Battery Life
Antenna
Weight
Dimensions
Operating Temperature
Storage Temperature
2.4GHz Digital Frequency
GFSK
Up to 328ft (100m)
3.5mm Headphone Jack
3.5mm TRS Output Jack
–60 dBV to -20dBV
Built-in Li-ion Battery or USB-C DC 5V or Charging Contact
Approx. 7 hours
PIFA Antenna
Approx. 32g(1.13oz)
62.1×31.6×16.5mm
–10°C to 50°C
–20°C to +55°C
Features Specications
BY-XM6 TX Transmitter
Transmission Type
Modulation
Operating Range (without obstacle)
RF Output Power
Polar Pattern
Frequency Response
Maximum SPL
Sensitivity
SNR
Power Requirements
Built-in Battery Life
Antenna
Audio Inputs
Weight
Dimensions
Operating Temperature
Storage Temperature
2.4GHz Digital Frequency
GFSK
Up to 328ft (100m)
＜10mW
Omnidirectional
35Hz-18KHz
Built-in Microphone: 120dB SPL
Lavalier Microphone: 110dB SPL
Built-in Microphone: -39dB
Lavalier Microphone: -39dB
> 84dB
Built-in Li-ion Battery or USB-C DC 5V or Charging Contact
Approx. 7 hours
PIFA Antenna
3.5mm TRS MIC/LINE IN Jack or Built-in Microphone
Approx. 32g(1.13oz)
62.1×31.6×16.5mm
–10°C to 50°C
–20°C to +55°C
Function
+
SET
Operation
On home screen, short press to adjust mic gain.
On menu screen, short press to select dierent functions
or values shown on the display.
On home screen, long press to enter the menu screen.
On menu screen, long press to enter the displayed menu.
Then, long press again to conrm your option.
5. +/SET button
6. - button
- On home screen, short press to decrease volume.
- On menu screen, short press to select dierent functions or values
shown on the display;
- long press to return to home screen.
7. USB-C charging port (DC 5V)
8. 3.5mm headphone output
- Connect headphones for audio monitoring.
9. LINE OUT jack
- Connect the BY-XM6 RX to a smartphone, tablet, camera, recorder or
mixer with the supplied output cables.
10. Antenna
8
9
10
Function
Power ON
Power OFF
Mute ON
Mute OFF
Operation
Long press
Short press
Function
+
SET
Operation
On home screen, short press to increase volume.
On menu screen, short press to select dierent functions
or values shown on the display.
On home screen, long press to enter the menu screen.
On menu screen, long press to enter the displayed menu.
Then, long press again to conrm your option.
4. Power/Mute button
5. +/SET button
Function
Power ON
Power OFF
Mute ON
Mute OFF
Operation
Long press
Short press
4. Power/Mute button
Wireless Receiver BY-XM6 RX
Product Structure
1. OLED display
- For more details, please refer to “OLED Display Operation Guide”.
2.Belt clip
3.Charging contacts
1
2
3
Wireless Transmitter BY-XM6 TX
1. OLED display
- For more details, please refer to “OLED Display Operation Guide”.
2.Belt clip
3.Charging contacts
1
2
3
6. - button
- On home screen, short press to adjust mic gain.
- On menu screen, short press to select dierent functions or values
shown on the display;
- long press to return to home screen.
7. USB-C charging port (DC 5V)
8. Built-in microphone
9. MIC/LINE IN jack
- It can be connected to the supplied 3.5mm lavalier microphone,
or other 3.5mm TRS microphones or line-in devices.
10. Antenna
8
9
10
Wireless Receiver BY-XM6 RX
Home screen
If no operation is performed within 20 seconds on other screens, the display will
automatically return to home screen.
1. Pairing indicator
Paired successfully Disconnected Pairing
2. RX’s output mode
M: Mono S: Stereo
3. Output volume & Mute indicator
on home screen, press +/- button to adjust the volume.
Mute ON Mute OFF
4. RX’s battery level indicator
Displays the RX battery level. Please recharge the device immediately when
the indicator starts ashing.
5. Audio input level meter
Displays the audio input level.
OLED Display Operation Guide
1 2 3 4
5
2.Wireless Transmitter BY-XM6 TX
Home screen
If no operation is performed within 20 seconds on other screens, the display will
automatically return to home screen.
1. Pairing indicator
Paired successfully Disconnected Pairing
2. Mic gain & Mute indicator
on home screen, press +/- button to adjust the microphone’s input gain level.
Mute ON Mute OFF
3. Audio input level meter
Displays the audio input level.
4. TX’s battery level indicator
Displays the TX battery level. Please recharge the device immediately when
the indicator starts ashing.
1 2 3 4
Mute Key Setting
Enable or disable mute key button function.
Default is “Enable”.
Output Volume Setting
Output volume can be set from 0 to 6.
Default is “5”.
Output Mode Setting
The output mode can be set to either mono or stereo. When in mono mode, the
audio from the transmitter, or transmitters will be mixed to both the left and right
sides. When in stereo mode, the two transmitters' audio output will be separated
to the left and right sides.
Default is mono.
Language Setting
English or Chinese are available.
Default is English.
Restore Default Setting
Version of the BY-XM6 RX
Menu screen
On home screen, long press SET button to enter menu screen.
On menu screen, long press - button to return to home screen.
Connect Setting
Pair with the receiver. For details of operation, please refer to
“Operation Guide”.
Backlight Setting
Set backlight to always on or on for 10/30/60 seconds.
Default is “On”.
Mute Key Setting
Enable or disable mute key button function.
Default is “Enable”.
Mic Gain Setting
Adjust the microphone’s input gain level (0~6).
Default is “5”.
Input Mode Setting
The input mode can be selected to Mic In or Line In. When Mic In mode selected,
the transmitter can be connected to the supplied lavalier microphone, or other
microphones with a 3.5mm TRS output. When Line In mode selected, the
transmitter can be connected to line-level output devices.
Default is "Mic In".
Language Setting
English or Chinese are available.
Default is English.
Restore Default Setting
Version of the BY-XM6 TX
1. Long press the power button to turn on/o the transmitter and the receiver.
2. Pairing
Before leaving factory, the system is pre-paired. Therefore, the connection will be
established once they are powered on. If they are disconnected, please follow below
steps:
① Long press the SET button to enter menu screen
② Use the + or -button to display the Connect setting menu on both transmitter
and receiver.
③ Long press the SET button to select the menu.
④ Select Yes, and long press the SET button to conrm.
⑤ Transmitter and receiver will be successfully paired within 10s.
3. Connect the receiver to the mic input of a camera, recorder or mixer with the
supplied 3.5mm TRS cable. Or connect the RX to a smartphone, tablet, or computer
with the supplied 3.5mm TRS to TRRS cable.
4. You are ready to record.
Operation Guide
RX TX
RX TX
- 2.4GHz wireless transmission technology
- Ideal for content creation, vlogging, mobile journalism, and more
- Delivers exceptional, broadcast-quality sound
- Ultracompact clip-on transmitter and dual-channel receiver
- Easy-to-use OLED display
- Real-time headphone monitoring
- Operating range of up to 100m
- High-quality built-in microphone
- Lavalier microphone included
无线接收器BY-XM6 RX
主界面
若超过20秒不操作，显示屏会自动跳转回主界面上。
1. 配对状态标识
联机成功 未联机 对码中
2. 接收器输出模式
M：单声道 S：立体声
3. 输出音量、静音状态指示
在主界面上，短按+/-键可调节音量大小。
静音开启 静音关闭
4. 接收器电量指示
显示接收器电量情况，若图标为空格且开始闪烁，请及时进行充电。
5. 实时输入电平指示
显示实时输入电平大小。
1 2 3 4
5
OLED屏幕操作指南
型号
BY-XM6-S1
BY-XM6-S2
套装内容
1×BY-XM6 RX
1×BY-XM6 TX
1×BY-XM6 RX
2×BY-XM6 TX
概述
BY-XM6组合套装
感谢您选择BOYA！
博雅BY-XM6 系统是迷你双通道无线麦克风系统，提供出色的广
播级音质，适用于相机、无反相机、手机、平板电脑等设备，是
内容创作、Vlog拍摄、街头采访等场景的理想选择。
8
9
10
6. - 键
- 在主界面上，短按-键减小音量；
- 在菜单界面上，短按-键调整各参数值或功能；
- 长按-键回到主界面。
7. USB-C充电口（直流电5V）
8. 3.5mm耳机插孔
- 接入耳机进行音频监听。
9. LINE OUT线性输出孔
- 使用随附输出线，将 BY-XM6 RX 连接至手机、平板电脑、
相机、录音笔或混音器等设备。
10. 天线
4
7
5
6
操作
在主界面上，短按+键增大音量；
在菜单界面上，短按+键调整各参数值或功能。
在主界面上，长按设置键进入菜单界面；
在菜单界面，长按设置键进入选定界面，再次长按保存设定。
功能
+
SET
功能
开机
关机
静音开启
静音关闭
操作
长按
短按
4. 电源键/静音键
5. +/SET键
8
9
10
6. - 键
- 在主界面上，短按-键调节麦克风增益；
- 在菜单界面上，短按-键调整各参数值或功能；
- 长按-键回到主界面。
7. USB-C充电口（直流电5V）
8. 内置麦克风
9. 麦克风/线性输入孔
- 可接入随附的3.5 mm领夹麦或其他 3.5 mm TRS 麦克风或线路输入
设备。
10. 天线
4
7
5
6
功能
开机
关机
静音开启
静音关闭
操作
长按
短按
4. 电源键/静音键
操作
在主界面上，短按+键调节麦克风增益；
在菜单界面上，短按+键调整各参数值或功能。
在主界面上，长按设置键进入菜单界面；
在菜单界面，长按设置键进入选定界面，再次长按保存设定。
功能
+
SET
5. +/SET键
1
2
3
1. OLED显示屏
- 详情参考“OLED屏幕操作指南”。
2. 背夹
3. 充电触点
无线发射器BY-XM6 TX
1
2
3
产品结构
1. OLED显示屏
- 详情参考“OLED屏幕操作指南”。
2. 背夹
3. 充电触点
无线接收器BY-XM6 RX
菜单界面
在主界面上，长按+/SET键，可进入菜单页面；
在菜单界面，长按-键，可返回到主界面。
连接设置
与发射器配对, 具体操作请参考“操作指南”。
背光时间设置
背光灯时间可设置为常亮、10秒、30秒、或60秒，
默认设置为“常亮”。
静音按键功能设置
开启或关闭静音按键功能，默认设置为“开启”。
输出音量设置
输出音量调节范围（0~6），默认设置为“5”。
输出模式设置
输出模式可以设置为单声道或立体声。当在单声道模式，音
频将混合到左右两边。在立体声模式下，两个发射器的音频
输出将左右分开。默认设置为“单声道”。
语言设置
English/中文可供选择，默认设置为“English”。
恢复默认设置
BY-XM6 RX版本号
无线发射器BY-XM6 TX
主界面
若超过20秒不操作，显示屏会自动跳转回主界面上。
1. 配对状态标识
联机成功 未联机 对码中
2. 麦克风增益、静音状态指示
在主界面上，短按+/-键可调节麦克风增益。
静音开启 静音关闭
3. 实时输入电平指示
显示实时输入电平大小。
4. 发射器电量指示
显示发射器电量情况，若图标为空格且开始闪烁，请及时进行充电。
1 2 3 4
菜单界面
在主界面上，长按+/SET键，可进入菜单页面；
在菜单界面，长按-键，可返回到主界面。
连接设置
与接收器配对, 具体操作请参考“操作指南”。
背光时间设置
背光灯时间可设置为常亮、10秒、30秒、或60秒，
默认设置为“常亮”。
1. 长按电源键，将发射器、接收器开机。
2. 配对
发射器和接收器出厂前已配对成功。因此，产品开机之后会自动联机。
若无成功连接，请进行如下配对操作：
① 长按SET键进入菜单界面
② 使用+或-按钮在发射器和接收器上选择“连接请求”菜单
③ 长按SET键进入菜单
④ 选择是，长按SET键确认
⑤ 发射器和接收器将在 10 秒内完成配对
3. 使用随附的 3.5mm TRS转 TRS转接线将接收器连接至相机、录音笔
或混音器等设备。 或者使用随附的3.5mm TRS 转 TRRS 转接线将 接
收器连接至手机、平板电脑等移动设备。
4. 开始录制。
操作指南
发射器接收器
发射器接收器
BY-XM6 RX 接收器
传输方式
信号调制
操作距离（无障碍）
音频输出口
音频输出电平
供电方式
内置电池续航时间
天线
重量
尺寸
工作温度
贮存温度
2.4GHz数字频段
高斯频移键控
最远至100米
3.5mm耳机插孔
3.5mm TRS输出孔
–60 dBV至-20dBV
内置锂电池 / USB-C直流电5V /充电盒触点充电
约7小时
PIFA天线
约32g
62.1×31.6×16.5mm
–10°C ~ 50°C
–20°C ~ +55°C
- 2.4GHz无线传输技术
- 视频内容创作、移动新闻等的理想选择
- 提供卓越的广播级音质
- 超紧凑型夹式发射器和双通道接收器
- 具有易于操作的OLED 显示屏
- 实时耳机监听功能
- 工作范围可达 100m
- 高品质内置麦克风
- 配备领夹麦克风
特点
传输方式
信号调制
操作距离（无障碍）
射频输出功率
极性模式
频率响应
最大声压级
灵敏度
信噪比
供电方式
内置电池续航时间
天线
音频输入源
重量
尺寸
工作温度
贮存温度
2.4GHz数字频段
高斯频移键控
最远至100米
＜10mW
全向型
35Hz-18KHz
内置麦克风：120dB SPL
领夹麦克风：110dB SPL
内置麦克风：-39dB
领夹麦克风：-39dB
> 84dB
内置锂电池 / USB-C直流电5V /充电盒触点充电
约7小时
PIFA天线
3.5mm TRS麦克风/线性输入，或内置麦克风
约32g
62.1×31.6×16.5mm
–10°C ~ 50°C
–20°C ~ +55°C
参数
BY-XM6 TX 发射器
0302 0504 0706
Menu screen
On home screen, long press SET button to enter menu screen.
On menu screen, long press - button to return to home screen.
Connect Setting
Pair with the transmitter. For details of operation, please refer to
“Operation Guide”.
Backlight Setting
Set backlight to always on or on for 10/30/60 seconds.
Default is “On”.
09
08
1110 1312 1514 1716
19
18
2120 2322 2524 2726
29
28
3130 3332 3534
40
BY-XM6-S1（1×BY-XM6 RX + 1×BY-XM6 TX）
1× BY-XM6 RX接收器
1× BY-XM6 TX发射器
2× USB-C充电线
1× 领夹麦
1× 麦克风夹子
1× 领夹麦防风海绵
1× 内置麦克风防风毛套
1× 3.5mm TRS转TRS相机输出线
1× 3.5mm TRS转TRRS手机输出线
BY-XM6-S2（1×BY-XM6 RX + 2×BY-XM6 TX）
1× BY-XM6 RX接收器
2× BY-XM6 TX发射器
3× USB-C充电线
2× 领夹麦
2× 麦克风夹子
2× 领夹麦防风海绵
2× 内置麦克风防风毛套
1× 3.5mm TRS转TRS相机输出线
1× 3.5mm TRS转TRRS手机输出线
包装清单
www.boya-mic.com
SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by
Shenzhen Jiayz Photo Industrial., Ltd.
TEL: [phone]
Email: [e-mail]
www.boya-mic.com / www.jiayz.com
深圳市长丰影像器材有限公司
地址:广东省深圳市龙华区观澜街道大富社区硅谷动力智能终端产业园A16栋
3736
39
38
01
静音按键功能设置
开启或关闭静音按键功能，默认设置为“开启”。
麦克风增益设置
麦克风增益调节范围（0~6），默认设置为“5”。
输入模式设置
麦克风输入模式：可接入3.5mm领夹麦克风或其他3.5mm
TRS麦克风。（系统默认设置）
线路输入模式：可接入线路输入设备。
语言设置
English/中文可供选择，默认设置为“English”。
恢复默认设置
BY-XM6 TX版本号
4
7
5
6
4
7
5
6
深圳市长丰影像器材有限公司
品牌
技术要求：
1、表面无色差
2、无正负公差
3、包装标注尺寸为内尺寸
子件名称 版本
材质
比例
审核
暂无
吴蒙蒙
2021-8-25
核准/日期 赵宏亮
单位1:1 mm
尺寸
子件编号
设计/日期
长丰型号
8
变更日期 变更担当变更内容版本修改名称
7
1 2
BY-XM6-K系列说明书
BOYA
BY-XM6
112x112
1F0300300430
V00
80g书写纸 骑马钉 48p
吴蒙蒙
长丰影像
2021-8-25
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
IC Caution:
Radio Standards Specification RSS-Gen, issue 5
- English:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired
operation of the device.
- French:
Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS
(RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement
est soumis aux deux conditions suivantes:
Cet appareil ne doit pas causer d'interférences.
Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de
provoquer un fonctionnement indésirable de l'appareil.
Models: BY-XM6 TX, WMX-2 TX, BY-XM6 TXW, BY-XM6 TX Mini, BY-XM6 TX Mini-W
Models: BY-XM6 RX, WMX-2 RX, BY-XM6 RXW
2ARN3-082801ATX
T