User's Manual

N6
User Manual
Manual before operating your device. In order to avoid unnecessary injuries, please do not
Disassemble this product by yourself, and please use a standard charger.
Product Specification
Driver: 10mm
Support Profile: HFP / AVRCP / A2DP
Charging Time: Up to 60 minutes
Working Voltage: 5V
Standby time: 100 hours
Playtime: Up to 50 hours (60% volume)
Transmission Range: Up to 10m
Working Temperature: -30°C - 70°C
Wight: 28.5 g
Bluetooth Pairing
Dual Pairing
When power off, long press the power button
until the white and red light blinks alternatively
indicating that N6 is in pairing mode.Turn on the
Bluetooth on your cellphone or laptop and open
the Bluetooth menu.Select“N6”and connect the
device, the white and red light off when you
connect the cellphone.The device will automatically
turn off if not connected cellphone within 7 minutes.
Connect your neckband with Device 1.
Turn off the Bluetooth of Device 1, and connect neckband with Device 2.
Turn on the Bluetooth of Device 1, both the devices will be paired to use.
Power On
Product Control
Long press power button for 3 seconds, and the white light on 1 second.
Power Off
Safety For You
Warranty
Product Charging
Plug the USB type-C to charging the device. On charging mode, the red light on until
charged finish. Once charged finish, the white light on.
The warranty covers your device , including accessories against manufacturing defects for 1
year from the date of purchase.
Which that are not covered in the warranty.
Unauthorized tampering, modifications or repairs of the device.
Physical damage of the device on the account of abuse, handling, storage, installation or
testing including any use that is not in accordance with the product manual.
Certification
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.”FCC ID: 2A7GB-N6
Long press power button for 5 seconds, and the red light on 1 second.
Product Contains
N6 Bluetooth Neckband x1
Large Ear Tips
x2
Medium Ear
Tips x2
(on the Neckband)
Small Ear Tips
x2
USB Charging
Cable x1
Do not expose device to liquids, moisture
or humidity. It has electronics and a battery
in it. Neither of them likes getting wet.
Don’t try to disassemble your device.
There are no user serviceable parts
inside it.
Don’t use abrasive cleaning solvents to
clean your device. Wipe them down with a
slightly damp cloth if and when necessary.
Try not to drop your device and keep
it away from sharp objects such as
keys in your pockets.
Remove and clean the earbuds tips
regularly, to ensure that you always enjoy
the best sound possible from your device.
Only charge your device from 5V USB
ports such as phone chargers and
laptops or PCs.
Do not expose device to extremely high or
low temperatures as this may damage the
battery or even deform the plastic parts.
Never listen to music at high volumes
or you may permanently damage
your hearing.
N6
Don’t throw yours device in a fire to
dispose it. The internal battery may
explode.
Pay attention to your surroundings
and never wear any headphones while
riding, driving or walking in traffic.
You do not come with any warranty.
Answer a Call
Short press the power button once
End a Call
Short press the power button once
Voice Assistant
Press the power button thrice
Reject Call
Long press the power button for
2 seconds
Long press for
2 seconds
Short press once
Short press once
Press thrice
Next Song
Long press + for 2 seconds
Previous Song
Long press for - 2 seconds
Play/Pause
press once
Volume Down
Short press -
Volume Up
Short press +
Reset
Long press + & - for 5 seconds
to reset the earbuds
press once
Long press
Long press
Short press
Short press
Long press
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is co
nnected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modi？cations to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition, compliance with exposure
requirements.