Installation Instructions

JR_G6T_AOP_PUB
Tel:[phone] Mail: [e-mail] Address:912 5A Building,ECO-
Technology Park,Yehai street,Nanshan district,Shenzhen city,Guandong province,China
Based on the detection characteristics of the sleep state
and breathing rate of the sleepers, the radar can be better
used in a healthy life, including:
a. Intelligent health single product linkage application
b. Household electrical appliances
Because the module needs to completely reset the internal
circuit of the module, and the environmental noise is fully
evaluated, to ensure the normal operation of the module.
Therefore, when the module is initially powered up, the startup
stabilization time needs 30s to ensure the effectiveness of the
subsequent output parameters.
Radar is a non-contact device, and the respiratory and
heartbeat detection of the target needs to lock the position of
the target first Then, the respiratory and heartbeat intensity
and value of the target were collected and calculated.
Therefore, the detection target is required to maintain a
resting state for detection within a reasonable detection range,
so as to avoid the continuous motion affecting the locking of
the radar to the target, thus affecting the detection of
breathing and heartbeat.
The detection distance of the radar module is closely related to
the target RCS and environmental factors, and the effective
detection distance may change with the change of the environment and