Installation Instructions

JR_G6T_AOP_PUB
Tel:[phone] Mail: [e-mail] Address:912 5A Building,ECO-
Technology Park,Yehai street,Nanshan district,Shenzhen city,Guandong province,China
the target. This module does not have the ranging function
temporarily, so it is normal for the effective detection range to
fluctuate in a certain range.
Because human biometric features are ultra-low frequency and
weak reflection characteristic signals, radar processing needs a
relatively long time of accumulation processing. In the
accumulation process, many factors may affect radar parameters, so
the accidental detection failure is a normal phenomenon.
The radar module has higher power quality requirements than
conventional low-frequency circuits. When powering the module, electricity
is required The source has no threshold burr or ripple phenomenon, and
effectively shields the power supply noise caused by the accessory
equipment. Radar module needs good grounding, and the ground noise caused
by other circuits may also cause the radar module performance decline or
even abnormal operation; the most common is that the detection distance is
approaching or the false alarm rate increases. To ensure the normal
operation of the VCO circuit inside the module, the power supply
requirement for this module is + 5V~+5.5V Electric, voltage ripple of
100mV. External power supplies must provide sufficient current output
capacity and transient responsiveness
My company thinks that we should try to describe the
documentation accurately during publication. Considering the
technical complexity of the product and the difference of the
working environment, it is still difficult to exclude some
inaccurate or incomplete descriptions, so this document is only for
user reference. Our company reserves the right to make changes to