User's Manual

TELEPHONE SETUP TELEPHONE SETUP
23
24
1. Press and hold the key to enter the menu .
2. Press to go to the contrast programming option.
3. Press to change the setting. 2 will begin
flashing.
4. Use the keys to toggle between the three levels
of contrast.
5. When the setting you desire is displayed, press
to save the setting. A double beep will
sound to confirm the setting has been saved.
6. Continue with programming or press to return
to the idle screen.
Adjusting the Contrast
PROG
/EDIT
/SAVE
PROG
""
You do not need PBX mode unless you need to dial A specific single digit
number before each outgoing call.
Turning PBX Mode On or Off
1. Press and hold the key to enter the menu.
2. Press to go to the PBX mode programming option.
3. Press to change the setting. will flash.
4. Use the keys to toggle between On and Off.
5. When the setting you desire is displayed, press
tosavethesetting.Adoublebeepwill
sound to confirm the setting has been saved.
6. Continue with programming or press to return to
theidlescreen.
PROG
PROG
/EDIT OFF
/SAVE
Note:
Setting the PBX Number
1. Press and hold the key to enter the menu.
2. Press to go to the PBX number programming option.
3. Press to change the setting. will begin
flashing.
4. Use the keys to customize the digit to match your
PBX system.
5. When the setting you desire is displayed, press
tosavethesetting.Adoublebeepwill
sound to confirm the setting has been saved.
6. Continue with programming or press to return to the
idle screen.
PROG
/EDIT
/SAVE
Note
9
: The number programmed here is not active unless PBX mode is On.
PROG
Changing the Pause Time
1. Press and hold the key to enter the menu.
2. Press to go to the pause time programming option.
3. Press /EDIT to change the setting. 2 will begin
Flashing.
4. Use the keys to select the desired dialing delay.
5. When the setting you desire is displayed, press
/SAVE to save the setting. A double beep will sound to
confirm the setting has been saved.
6. Continue with programming or press to return to
the idle screen.
PROG
PROG
The contrast is optimized for viewing and will probably not need to be changed
from the default setting. It will adjust the display background lighter or darker.
#
#
5JKL
FLASH
MEM
6MNO
FLASH
MEM
#
#
7
PQRS
FLASH
MEM
8
TUV
FLASH
MEM
TOTAL
TOTAL
TOTAL
CID
CH
ERASE
REVVOL
EDIT
SAVE
PAU SE
OPTION
Southwestern Bell
Freedom Phone
R
MUTE
CID
CH
ERASE
REVVOL
EDIT
SAVE
PAU SE
OPTION
Southwestern Bell
Freedom Phone
R
MUTE
CID
CH
ERASE
REVVOL
EDIT
SAVE
PAU SE
OPTION
Southwestern Bell
Freedom Phone
R
MUTE
CID
CH
ERASE
REVVOL
EDIT
SAVE
PAU SE
OPTION
Southwestern Bell
Freedom Phone
R
MUTE
TOTAL