User's Manual

SETTING THE RINGER ON/OFF CONTROL

If you wish to turn off the ringer, set the ringer switch on the side of the handset

to "OFF".

There are three types of rings:

• Incoming call ring: Two-tone ring synchronized with an incoming call signal.

• Priority ring (VIP): A different ring sound that allows you to distinguish the

caller. To set this function, see the Section, "VIP (Priority Ring)" on page

34.

• Paging ring: Single tone three short beeps. Press the page button for at

least three seconds to extend the paging time to 30 seconds.

NOTE:

The auto talk mode will work even when the ringer switch is set to OFF.

The paging ringer will sound even when the ringer switch is set to OFF.

TONE/PULSE SETTING

The GH3050 will operate on tone or rotary (pulse) systems.

1. If your house is wired for rotary service, move the TONE/PULSE switch

(on the back of the base) to the PULSE position.

2. If your house is wired for tone service, move the TONE/PULSE switch to

the TONE position.

3. If you are unsure of the type of dialing service you have, set the switch to

TONE. On the handset, press the TALK button and dial any digit on the

keypad. If the dial tone persists, switch to PULSE.

3050manual 2-20.P65 2002-5-31, 9:2419