User's Manual

26
The PAGE button cannot be used in the following conditions:
(1)When the handset is on the base unit.
(2)When the handset is in the talk mode.
(1)When the TALK button is pressed, the Page function will be terminated
and the handset will go into the talk mode.
(2)When an incoming call is received during Page mode and the ringer switch
is set to ON, the Page mode will be terminated and the incoming ringer
will start.
DIGITAL SECURITY SYSTEM
The security code prevents your cordless telephone conversation from being
accessed by a phone on a different line. Once the handset battery is fully charged,
the handset will automatically select the code from a total of over
65,000 combinations. The code is changed every time the handset is placed in
the cradle.
If you experience difficulty with placing or receiving calls, a lost security code
may be the cause of the problem. When this occurs, the handset can no longer
communicate with the base. Reset by placing the handset on the base for 5-10
seconds. If that does not work, unplug the AC adaptor from the wall outlet.
Disconnect the handset battery for 5-10 seconds, then reconnect. Place the
handset back on the base and then replug the AC adaptor.
NOTE:
NOTE:
3050manual 21-34.P65 2002-5-31, 9:2626