User's Manual

33
The display dial number will be cleared from the display under
the following conditions:
1.No operation is performed within 30 seconds after the number is
displayed.
2. The TALK button is pressed.
3. The ERASE button is held down for more than 2 seconds.
TWO-TOUCH MEMORY SPEED DIALING
1. In the talk mode, press the MEMO (MEMORY) button.
2. Select the desired location number (01~20) to dial the number.
After 2 seconds, the characters will disappear, and the entered
phone number will be dialled.
• The location number has to be entered within 30 seconds of pressing
the assigned number button, otherwise an error tone sounds and
the memory dial mode is canceled.
• If you press a number button for which no telephone number has
been assigned, an error tone sounds and the memory dial mode is
canceled.
• Any other numbers you may dial (including other numbers from
the dial memory) are dialed after the last digit of the two-touch dial
number.
.
NOTE:
3. Press the button twice more or the button once to view the full
telephone name.You can return to the original display by pressing
the button once more or the button twice.
NOTE:
3050manual 21-34.P65 2002-5-31, 9:2633