User's Manual

Example :

Insert "5" at the beginning of the telephone number.

Perform the following steps after steps 1-4.

5. Press the ERASE button momentarily. The first digit "1" will be

deleted and the second digit will start flashing.

6. Press the 5 button, and "5" is inserted before the first digit.

7. Press the PROG (PROGRAM) button again, and "Save OK" will

appear for 3 seconds. A confirmation tone will be heard, indicating

that the new data has been saved, and the programming mode will

be exited.

EDITING CALLER NAMES

Deleting the character "S" in the caller name Jack

Thomson.

1. Press the CID button when no telephone number is displayed on

the LCD to open the caller list.

2. Select the desired caller data using the or button.

3. Press the PROG (PROGRAM) button.

Example :

3050MANUAL 35-44.P65 2002-5-31, 9:2742