@ BELL SOUTH 900 MHz CORDLESS CALLER ID TELEPHONE WITH CALL WAITING 40 CHANNEL AUTO SCAN Model MH9915 OWNER'S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS PLEASE READ THIS MANUAL CAREFULLY BEFORE USE. KEEP FOR YOUR REFERENCE. For installation information, please see “Getting Started” instructions on page § or your separate Quick Start guide.
= 4 HEADSET JACK Your telephone can utilize a headset far hands-free communication. BELT CLIP Use the BELT CLIP to hang your HANDSET on your blat. CALLER ID SYSTEM HANDSET ANTENNA Multi-Function Large LCD Screen Shows the number you are dialing and, with caller ID Service (valiance through Conscription from your foal telephone 2. LARGE LCD SCREEN LIMESCALE any), dis ou caller before you answer call.
HANDSET Controls 3. SAVE/RE (REMEDIAL (PAUSE) ( 53% | Button: (SAVE) Press and hold down to save the changes on the listed items. (REDIAL} Press to redial the last number you dialed. (PAUSE) Press to insert a pause while dialing. {You wilt need the (a2) button fo dial numbers which use an alternative Lang Distance Access Code.) 4. DIR (DIRECTORY) (dir | Button: Press lo access names and numbers stored in the DIRECTORY. (Ses pages 15 lo 20 for details.
BASE UNIT Controls YE RTT ell . TELEPHONE LINE CONNECTION JACK . POWER-IN CONNECTION JACK TONE/PULSE Select Switch . ANTENNA; Raise or reposition for the best reception, | . IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the EON EF ok eh HANDSET is in TALK mode er an extension telephone is in use. (CHARGE) 6,30 Lights up when the HANDSET is placed on the BASE UNIT for charging. ~ \ 6. PAGE (Page) Button: Press to page the HANDSET. 7. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK.
Contents Safely Instructions... Getting Started. Desk Mounting. Wall Mounting. Cordless Telephone Operation, Preparing for Use... Receiving Calls... Extension Phones... Placing Calls. Using the Headset Feature... Redial Feature Calder ID System Operation... Caller iD System. Viewing Caller Information During Incoming Calls... Message Call Waiting... Voice Mail Forwarded Call Long Distance Caller Lis Viewing the Caller List...
HA FA Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, always follow these basic safety precautions when using your cordless telephone equipment. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone 3. Do not use this telephone near a bathtub, wash bowl, kitchen sink, of laundry tub, in a wet basement, near a swimming pool, or anywhere else where there is water. 4.
Getting Started Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. 1. Carefully remove your cordless telephone from its shipping carton. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase. 2.
ANTENNA Press the (talk) button to confirm that you have dial phone. if you do not get a dial tone, review steps 3 through 12. If you still do not have a dial tone, refer to the Problem Solving section on page 30. | BELT CLIP HOOK HANDSET AY 4 With the back of the HANDSET facing up, insert one side of the BELT CLIP HOOK into the matching slot at the top side of the HANDSET. Press down on the opposite side of the BELT CLIP until the other hook locks inch the soot on the side of the HANDSET. 13.
Wall Mounting Wall Mounting You may choose to put the BASE UNIT of your cordless telephone on a wall. 1. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE LINE CORD to the TELEPHONE LINE CONNECTION JACK. . Insert the free end of the SHORT TELEPHONE LINE CORD through the hole of the MOUNTING BRACKET, . Insert the hooks of the MOUNTING BRACKET (following the arrow direction for the WALL MOUNT) into the matching slots of the BASE UNIT (as shown below).
Extension Phones Extension telephones can be connected. This telephone can detect when an extension phone is being used whether the HANDSET is ON-HOOK or OFF-HOOK. When you lift the HANDSET and an extension phone is being used, “EXT IN-USE" will be displayed and simultaneously the PRIVATE CALL indicator will blink on the LCD Screen. This means that an extension telephone is in use. You will have to wait until the ling is free to make a call.
Caller ID System Operation Caller ID System Operation Caller ID System This telephone automatically displays an incoming caller's name and telephone beriberi together with the date and time of the call. it records up to 80 calls and stores the data in Memory. IMPORTANT: You must subscribe to the Caller ID service from your local telephone company to utilize this feature. Viewing Caller Information During Incoming Calls 1.
Caller ID System Operation Viewing the Caller List 1. Press the SCROLL DOWN [C2] bunion to view the latest Caller ID record, or press ihe SCROLL UP (a) button {0 view the first Caller ID record, press the SHIFT RIGHT oo») bunion 7 if the name has more than 11 digits. 2. Press the (dir) button to go back to STANDBY mode. (If no active buttons are pressed for 20 seconds of you have viscid the last Caller ID record in the Callers List, the LCO Screen will automatically return to STANDBY mode.