Content Content .............................................................................................................................................. 1 1 Introduction .................................................................................................................................... 3 1.1 Acknowledgement ............................................................................................................... 3 1.2 Announcements .................................................
8.2 Calculator .......................................................................................................................... 55 8.3 File Manager ..................................................................................................................... 56 9.4 Recorder ............................................................................................................................ 58 9 Installation of Procedures................................................................
1 Introduction 1.1 Acknowledgement Thanks for your purchase of our product. M7057,is a 7inches high clear board computer. Its CPU is MT8321, it is based on Android 6.0 operation system, and easy to expand the third application procedure. The product is designed with various functions, including 3G, WIFI, BT, GPS,FM, voice call and so on.
information. For further details, please refer to the safety instructions and announcement. Never use the MID when driving car, in order to ensure safe driving. In the medical area, please abide by related rules and regulations. Please shut down the MID when it is near to the medical area.
1.4 Abbreviation/Terminology Abbreviation/Terminology Full Name Description MID Mobile Internet Device Mobile Internet Terminal WIFI Wireless Fidelity Base on IEEE 802.11b\g\n standard wireless LAN TF TransFlash Alternative name Micro SD,super miniature memory card 5
2 MID Introduction 2.1 MID Operation and Preparation Battery Charging If this navigator is first used, please use AC adaptor to fully charge it. 1. Apply the power adptor to charge for MID. 2.2 MID Status and Reminder Reminder icons When some remind message appears in your reminder window, please click column and slip the screen to open the reminder list. Choose the menu you need, and confirm the information. Then you can close the reminder window through clicking the column to slide up.
Reminder board Reminder icons will work while receiving emails, WIFI is open, you can open the reminder board to view the detailed information. Open the reminder board When the reminder column shows new reminder icon, please hold the column and slip down your finger, then the reminder board is opened.
3 Quick Start Guide 3.1 Keys Function Keys Funcction Description: Power button Short press to sleep/wake up, long press to startup and shutdown. Volume +(up) increase the volume Volume -(down) decrease the volume Click it in any interface will return to main interface. HOME button (home) Back button(back) Menu button Setting button click it in any interface will return to previous menu This button will display in menu interface. display recently browsed history 3.
power 2. When screen is open, press POWER key, the screen will be closed immediately. Open the screen when it is closed. If the screen is closed, short press POWER to open the screen. The screen will be locked open it, it will show the picture as below picture, left slide to unlock and enter into camera, right slide the unlock icon to unlock the screen. Picture 3.1 3.4 Usage of Touch Screen MID operating methods There are below methods to view the main screen, menu and application procedure in your MID.
Rotate For most pictures, you only need to retate the MID sidewise to change the screen direction from horizoncial to vertical. For instance, when you are typing wods, and watching movies. 3.5 Home Page Main interface as below picture 3.2, long press the blank and it will popup windows to set wallpaper, folder, widgets, and shortcut. Notice Batty volume column return Picture 3.
Picture 3.3 The shortcut icons management in desktop application. Create folder icon in desktop 1. Drag the icons need to be put together on one icon(can also overlay several icons)as Picture 3.4. 2. Then click the overlayed icons, the applications can be folded, as Picture 3.5. Click the unnamed folder in the black box, it will popup the hidden keyboard, the folder name can be renamed (this is similiar with Apple IOS system), the icons position can be changed through long press. Picture 3.
Picture 3.5 Remove the icons in desktop 1. Long press the icons need to be remove, then on the right above of the screen, it will appear icons. 2. Drag the icon to the above of the remove icon, till the icon become red, then move your finger to delete the icon. Change the wallpaper of desktop 1. In home page, long press any blank space in main screen, it will popup a window to change the wallpaper. 2. Click the gallery or wallpaper gallery to select the wallpaper.
3.6 Visit Application Procedures in right top of Picture 3.2, enter into main interface as Picture 3.6, choose the application procedure you want to visit. Click Picture 3.6 Return 3.7 USB Connection to home page MID storage configuration Before transmitting documents, you have to conduct storage configuration for your MID: 1. Connect the MID and computer by USB cable, the reminder column will show the remind information. 2.
Picture 3.7 Copy the document into memory card 1. Connect the MID to computer with USB cable. 2. As MID storage configuration, it is connected with computer successfully. 3. Open the “My computer” in your computer, check the items in “MTP devices”. 4. Copy the documents you need into “MTP devices”. 5. After copying finishes, Unplug the USB can. 3.8 Typing words Use the screen keyboard When you start the procedure or choose the words or numbers edition, it will show the screen keyboard.
Use and switch of input method ⑤ ④ ① ② Picture 3.8 ③ 1 switch the capital and small letter 2 switch the mode of words input 3 click to insert the space 4 click input to execute 5 delete the character in the left of cursor, click and hold to delete all the characters in the left og the cursor.
3.9 Operation Technique Enter widgets interface In the application interface,click widgets on the above of screen, or slide the screen, it will swtich into widgets interface. Long press any widget to create its shortcut, then you can enter into the application through the shortcut icon.
4 Basic Setting 4.1 Wireless and Internet 1. Connect Wi-Fi 1) In the main menu or interface, choose setting application procedure. 2) Click WLAN, open wifi, MID will automatically search the available Wifi wireless internet. As Picture 4.1 3) Choose the Wi-Fi internet you want to connect, if it has password, it will popup the password window, enter password, click connect. Picture 4.1 2. Add Network 1) Click icon in right top, as Picture 4.
Picture 4.2 2) Input network SSID, the wireless network name, click save. 3) Click user name already saved, click connect to use network, as Picture 4.3 Picture 4.3 3. Network Notice If you open Network Notice, when WIFI signal appears, the right bottom will remind you available WLAN network, as Picture 4.1 4. Keep WI-FI on during sleep.. 1. Click icon in right top of Picture 4.3, select advanced. 2. Click Keep WI-FI on during sleep, as Picture 4.
Picture 4.4 4.3 Bluetooth Bluetooth function operation 1. Click setting application in main menu interface 2. Click bluetooth and open it. 3. If somebody open bluetooth in your surroudings, click search device in right above, then MID will automatically search the bluetooth device nearby. As picture 4.5 Picture 4.5 4. Click the available Bluetooth device, it will popup request window, enter into related password, and match the device to connect.
5. After match successfully, choose the operation you want to, click to enter into Picture 4.6. Picture 4.6 Bluetooth setting 1. Rename tablet Click icon in right top of Picture 4.3, as Picture 4.7, select rename tablet, you can rename it as you want Picture 4.7 2.Display the file you received Choose display the file you received in Picture 4.7, you can view download and upload files.
4.4 Data Usage Check SIM card data usage, as Picture 4.8 Picture 4.8 Check WIFI data usage Click icon in right top of Picture 4.8 click Data Usage, as Picture 4.9 Picture 4.9 4.5 More 4.
Airplane Mode can turn off WIFI and GSM card function quickly, when airplane mode is turned on, WIFI and GSM can’t get any signal, then airplane mode is turned off, WIFI and GSM module will recover to previous state. 4.5-2 VPN Open VPN, click add VPN network, as Picture 4.10. Input name and server address, then save. Picture 4.10 Click VPN, as Picture 4.11, input VPN user name and password, click connect. Picture 4.
4.5-3 Network sharing and portable hotspots Portable WI-FI hotspots 1. Click setting application in main menu. 2. Click more when wifi is well connected, open network share and portable hotspot Picture 4.12 Picture 4.13 3. Click keep WI-FI hotspots on, choose open time. 4. Return to previous menu, open portable WLAN hotspots, click Set up WI-FI hotspots.
Picture 4.14 5. Set passwords you want to, password should be more than 8 numbers. 4.5-4 Mobile Networks 1.Access Point Name( APN) Choose access points name (APN), choose SIM card you need to connect, Choose connect type Remark: (CMWAP transmitters data through GPRS, the webpage it visit belongs to wap webpage, and CMNET support www browse mobile phone network, it can also log in webpage in computer. And the charges are also different.) 3.
Picture 4.15 4.5-5 GPRS data prior mode After Open GPRS data prior mode, systems will priority chooses your network. 4.6 Sound & notification 1. Open settings, click contextual model, as Picture 4.16, Picture 4.16 2. Click standard to enter into Picture 4.
Picture 4.17 1. Vibrate In picture 4.20, click vibrate, MID will vibrate when someone calls you. 2. Volume In picture 4.27, click volume, you can set ringtone, notice, and alarm volume, as Picture 4.18 Picture 4.18 3. Voice call Ringtone In picture 4.17, click phone ringtone to choose voice call ringtone, as Picture 4.19 Picture 4.
(Note: Except standard, silent, meet, outdoor are only for selection, they can’t be set.) 4.7 Display 4.7-1 Adjust the screen brightness 1. Click Setting application procedure. 2. Click display, choose brightness, 3. Drag the portlito to adjust the brightness volume.As Picture 4.20 Picture 4.20 4. Click OK after brightness is adjusted. 4.7-2 Wallpapers 1. Click setting application. 2. Click display, click wallpaper. 3.
Picture 4.21 4.7-3 Auto rotation System is defaulted as open auto rotation, when it is turned off, system won’t rotate MID screen by G-sensor. 4.7-4 Sleep 4. Click setting application. 5. Click display. 6. Click sleep. 7. Set the sleep time as you want, as Picture 4.
Picture 4.22 4.7-5 Font size Click font size to adjust the font size, as Picture 4.23 Picture 4.23 4.7-6 Daydream Charging Case, the tablet will enter the screen saver state 4.8 Storage Open setting function, click memory, click preferred install location, you can choose isntall new application to choose preferred install location. Check SD card and MID storage space. 1. Enter into setting application. 2. Click storage, check storage space. 1.
Picture 4.24 (2)Internal storage Internal storage is MID local NAND storage, as Picture 4.25, if you need to check the storage content, you can check it in main menu. Picture 4.25 2. SD card You can check storage space, SD card available space, unmount SD card and erease SD card, as Picture 4.
Picture 4.26 Safely remove SD card 1. Click setting application. 2. Click memory. 3. Click uninstall SD card. 4. Now you can remove SD card safely. Note: Removing SD card safely can protect SD card and increase its lifetime. 4.9 Battery Click setting function, select battery, you can view the battery situation, as Picture 4.
Picture 4.27 4.10 Application program 1. Click setting application in Apps. 2. Select application, after enter, you can manage and delete installed application and check system used storage space and left space. (As Picture 4.28) Picture 4.28 3. View the working device, used space and available space, as Picture 4.29 Picture 4.
4.11 Account and Sync 1. Select setting application 2. Open account and sync, as Picture 4.30 Picture 4.30 3. Click add an account, as Picture 4.31 Picture 4.31 4. After successfully load, it will open the sync function, as Picture 4.
Picture 4.32 4.12 Location service Click setting, select Mode, as Picture 4.33 Picture 4.
4.13 Safety setting Set locked screen Lock the touch screen by unlock icon or password to protect your MID. Note: After setting screen locked, you should enter the passcode each time when you startup or screen is locked Set unlocked picture 1. Click setting application in main interface. 2. Click safe. 3. Click locked the screen. 4. Choose picture in text setting area. 5. Click next following the remind message. 6.
5. Enter new PIN code(numbers) and click continue. 6. Ener new PIN code again and click confirm. Set unlock password 1. Click setting application in main interface. 2. Click safe. 3. Click screen locked. 4. Set password in text seting area. 5. Set new password(letters and numbers) and then click continue. 6. Enter the password again and the click confirm. Unknown source 1. In main interface, click setting. 2. Click safety. 3. Click unknown source,as Picture 4.35 Picture 4.
Picture 4.36 Click setting, choose language and input, choose Android keyboard setting, click input language, as Picture 4.36 Picture 4.36 Choose the language you want to change in the language list, as Picture 4.
Picture 4.37 4.15 Backup and Reset Connect WIFI and login your google account, choose backup my data, system will backup your data into google server. If you need to recovery factory reset, please click reset, as Picture 4.38, if you need to formulate NAND, please click reset tablet. Picture 4.
4.16 Date and Time According to the preset, system will voluntorily apply the date, zone, and time provided by internet. Manual set date, time and zone 1. Click Setting application procedure. 2. Slide down the screen, then click date and time. 3. Turn off “auto setting of date and time”. 4. Turn off “auto setting zone’. 5. Click Zone Selecting, then choose the zone lists. Slide down the list to view more zones.
4.17 Fixed-time Startup and Shutdown 1. Click Setting application procedure 2. Click fixed-tine startup and shutdown. 3. Operate as below Picture 4.40 Turn on/off fixed-time startup Click it into fixed-time startup setting Turn on/off fixed-time shutdown Click it into fixed-time shutdown setting Picture 4.40 4.18 Assisstance Function 4.18-1. Large size Click it to make system font large size 4.18-2. Click power button to end calls When Click call, press “power” button, call will end but not hold.
Picture 4.41 4.18-4 Install webpage script It will allow you install webpage scrip when you open system,, but it will increase the risk when you are browsing webpage. 4.19 Engineer Selection 4.19-1 USB adjustment After opening USB adjustment, you can use some software to read MID software, but when USB adjustment is turned on, USB storage needs to manual adjust. 4.19-2 Keep awaken state If you open keep awaken state, it wll never auto sleep when your MID is charging. 4.
Picture 4.42 4.20 About Tablet Check MID state 1. Check Setting application. 2. Click about tablet, check state message, model, Android version, version No and so on. 3. Click state message, check battery state, battery volumne, SIM state, IMEI number, IP address.
5 Multi-Media 5.1 Music Enter into music player: in menu or desktop click music icon to enter into music player, click the music you want to play, as Picture 5.1: Picture 5.1 Random play Album Song name Artist Album Pause/play Picture 5.
Drag the progress bar to adjust play progress. Operation of music player button as Picture 5.2 5.2 Photo Gallery Photo gallery application can auto search photos and video files in SD card, and photo gallery will classify these photos and videos in folder. You can apply photo gallery to view and edit photos, set the photos as wallpaper and watch the video. View pictures 1. Click gallery application in main interface. 2. Enter into gallery, click the folder you want to view. 3.
4. Click save. 5. If you want to give up edit, click return key, click not to return to picture browse. 5.3 Camera In the main interface or desktop, click camera application procedure , enter into camera Operation of camera ,Switch camera: choose Menu key, click switch front/back camera, as Picture 5.4 View normalCamera mode Flash on/off Switch front/back camera Click it to take pictures Motiontrack mode Face mode pictures videos the and beauty camera shooting mode Picture 5.4 5.
Exit FM Open speaker Save button Current frequency Next channel Previous channel Picture 5.
Save channels: Click button in the main interface to save the channel, and the channel will be saved in channels list. Note: You need to insert earphone as antenna when using FM radio, If no antenna, your MID can’t search any frequency band.
6 Communication Function 6.1 Phone 1 Click Phone application procedure 2 Operate as Picture 6.1 Dial phone numbers Display phone numbers Picture 6.
6.2 Text Message 1 Enter into main menu, choose application procedure. Menu(discard,insert text and settings) 2 Click “Edit new message” Directly input Add receiver phone number Send message Picture 6.2 6.3 Contact List Click Contact list in the main interface, enter into the contact list as Picture 6.
Picture 6.3 Search contact: click Add contact: click button, enter into search function button, enter into add contact interface.
7 Internet 7.1 Browser In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.1 for wireless and internet setting), click IE browser in the main menu or desktop to enter the IE interface, as Picture 7.1 Address column Save bookmark menu Picture 7.1 Click address bar to input the website, click start, enter into related webpage, then you can browse the website information, as Picture 7.1.
Picture7.1.2 7.2 Email Email application procedure contains email setting guide, you can add the external POP3 OR IMAP email account of normal web email service provider (For instance, Yahoo, Gmail, Hotmail and 163),as Picture 7.2 Picture 7.2 a.
1. After you click the sending email icon which can help you to set. , you can see the email setting guide, 2. Input your email address and password. 3. Click “Next step” button, choose your email type is POP3 or IMAP. 4. Click “Next Step” button to check whether the email box servicer can receive or send emails 5. Input the email account and display the email subiject, and click finish. 6. If the email box is available, you will enter into your mail box automatically. b.
Click it and Add attachment Picture 7.
8 Other Application Procedures 8.1 Clock Click Clock procedure, enter into below interface as Picture 9.1. There are clock, picture, music and homepage buttons. Set alarm Picture 8.1 8.2 Calculator 1. Click. 2. Enter into the basic board of calculator. 3. Soft touch the numbers or operator in calulator to calculate.
Pictuer8.2 8.3 File Manager File manager will copy, cut, delete, rename the documents or the folder in the TF card, it also will share the files, install apk etc. In the main menu or desktop, click the document manager icon to enter into documents manager. RAM External SD card Picture8.
folder to enter into the interface as Picture 8.4, you can operate the file or folder. Picture8.4 b、Paste the copy or cut file: choose the file you want to paste, icon to enter into Picture 8.5, Picture8.5 C. Share file:choose any file, long press it, it will popup “share”, choose the share way you want in the list(Picture 8.
Picture 8.6 d、Install apk file:Choose the file suffixed .apk in the file manager, you can install the third part software as reminder. e、Build new folder: Choose the menu you want to build the file, click icon in right top, choose new folder, you can build new folder as reminder. 9.4 Recorder In the main interface or desktop, click recorder icon record key to start record. Click Stop key to enter into record interface, click to stop recording. Click Play key to play the recorded sound.
Picture8.
9 Installation of Procedures 9.1 Installation Install the third party application procedure 1. Click “file manager” application procedure; choose the application procedure you need to install. 2. Hold the application procedure you need to install. 3. It popup install, click install apk. 4. Finish the installation as guide, it will operate. Note: The third party procedure searched from internet to use on the system are all suffixed with .apk. 9.2 Uninstall Uninstall application procedure 1.
10 Troubles Shooting 1. The first startup of MID is slow After the MID system upgraded, the first startup need to install the pre-installed application softwares, the lead time is around 2-3 minutes, the startup afterwards will be much quicker. 2. 3. MID can’t connect Wi-Fi Make sure the wireless router of internet service can work in normal. Ensure the MID and wireless router in certain distance, and no wall or other barrier between them. Ensure the user name and password both correct.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.